ok guys need some help i have a 89 GQ with the RB30 carby in it and want to put EFI in it
do say its not worth it the engine in it is f**ked and was give a R31 skyline for free
so no.1 do i need to swap the sump and oil pick up over?
no.2 i was told the R31 in tank fuel pump fits in to the GQ tank..is this true?
no.3 from other conversions i have done the ECU on the R31 gets its power from the plug nere the AFM...is there any other way to get power to the ECU
no.4 i need a nice clear diagram of where to wire power to ect.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
RB30 Carby to EFI
RB30 Carby to EFI
Tires are like boobs, they always look big until you have played with them for a while, then you just want a bigger set
ok guys up date
If you follow any of this your doing it at your own risk and i do not take any responsibilitys for any damage
on the 15 pin connector as it says in the pin out 12V to batterie and earth to earth
on the 20 pin connector pin 6 i didnt use this one
on the 16 pin connecter pin 26 and 38 is ground. pin 34 gose to 12v ignition when key is turned on pin 27 and 35 i put to the 15 pin connector 12V
This plug sits over near the AFM (air flow meter)
i put the red wire to batterie and the red with white trace i put to 12v ignition when key is turned
If you follow any of this your doing it at your own risk and i do not take any responsibilitys for any damage
on the 15 pin connector as it says in the pin out 12V to batterie and earth to earth
on the 20 pin connector pin 6 i didnt use this one
on the 16 pin connecter pin 26 and 38 is ground. pin 34 gose to 12v ignition when key is turned on pin 27 and 35 i put to the 15 pin connector 12V
This plug sits over near the AFM (air flow meter)
i put the red wire to batterie and the red with white trace i put to 12v ignition when key is turned
Tires are like boobs, they always look big until you have played with them for a while, then you just want a bigger set
hey mate i done a vl turbo motor into mine a couple of year ago and yeah the sump needs swapping and oil pick up. just from memory the radiator inlet flange is different along with your power steer pump and alternator will have a different pulley on it as to the new rb30 your putting in if i think of anything else ill let you no my mates an auto elec so he done all the wiring but i think he powered up the pink wire just near the ecu with ignition power and i dunno what else needs doing as for the fuel pump we just wired it straight up to ign power to make sure you put the vl intank and outter tank fuel pump in to. hope it helps you out.
Who is online
Users browsing this forum: No registered users and 11 guests