Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

body lifts

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 84
Joined: Fri Mar 26, 2010 3:27 pm
Location: hunter valley nsw

body lifts

Post by jezzaGQ »

hi im asking for a mate whos wanting to do a body lift... will 60series or hilux 2inch blocks fit into an 80 series wagon? cheers
GQ 4inch spring 2inch bodly lift drop boxs 4.6 diffs 35inch bighorns locked in the front trippin in the rear sliders................ next step duel cab reduction blah blahblah
Top
Posts: 71
Joined: Sat May 24, 2008 1:14 pm
Location: geelong, vic

Post by hurricane »

all the body blocks ive seen look the same, just a alloy block with a hole down the centre.

so as far as i know it would only the amount of the blocks, or the length of the bolts that might course u issues?

dan.
84 FJ60, SOA , 35's, 5ltr V8, Straight Gas. 80's coils in the making.
Top
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Post by Willy Hilux »

Could use a boat trailer roller and cut it in half. :cool:
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Top
Posts: 454
Joined: Mon Nov 06, 2006 5:05 pm
Location: campbelltown sydney

Post by coopster »

i got new alloy blocks if interest
hilux dualcab white
Top
Posts: 71
Joined: Tue Mar 16, 2010 1:07 am
Location: perth, west. aus

Post by maddog_75 »

coopster wrote:i got new alloy blocks if interest
got enough 2 inch blocks to do a 75 cruiser?
Top
Posts: 765
Joined: Fri Mar 12, 2010 7:28 pm
Location: Fixing something else the kids have broken

Post by BadMav »

Willy Hilux wrote:Could use a boat trailer roller and cut it in half. :cool:
Now that's thinkin outside the box!!!
Don't take life too seriously...it isn't permanent.
Top
Posts: 206
Joined: Wed Oct 05, 2005 9:10 am
Location: Ulmarra n.s.w

body lift

Post by brendan rooke »

I put my old body blocks out of my 60 in my mates 80, i made them from neoprene rod 65mm diameter and cut them into 3" lengths.

I removed the factory rubbers so this gave it 2 inch lift.
_______________________________________

61 Series..12HT..SOA..37"claws.
Top
Posts: 84
Joined: Fri Mar 26, 2010 3:27 pm
Location: hunter valley nsw

Post by jezzaGQ »

sweet as thanks for your input ill let him know so he get his ass in to gear lol
GQ 4inch spring 2inch bodly lift drop boxs 4.6 diffs 35inch bighorns locked in the front trippin in the rear sliders................ next step duel cab reduction blah blahblah
Top
Posts: 101
Joined: Sun Sep 20, 2009 5:30 pm
Location: BRISBANE

Post by S.CoXy »

Could use a boat trailer roller and cut it in half. Cool
We have always used 50 or 70 mm nylon stick from a bearing shop and cut it to lenth the drilled holes and glued washes on the end. Cost $50 plus bolts never had the need for a crush tube and some of these where done 5yr ago...
PISSED AND BENT TOURS


87' Hilux tray
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests