In a nutshell i stumbled across a spare parts car that appears to still have a complete and functioning( holds gas) air con system. While my car was apart i replaced all the O-rings in my system with the new style in anticipation of getting a new compressor and hoses.
I was hoping to use the spare parts compressor, hoses,etc. and just get it converted to r134a gas but am unsure of whats required. Maybe im just better off buying a new compressor and hoses to suit?
Can any one shed some light, I want to strip out the parts car over the long weekend but wont be able to sort out the aircon for a while yet.
THanks, I hope it makes sense
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
old gas type car aircon upgrade? what do i need
Moderators: toaddog, TWISTY, V8Patrol, Moderators
When I converted my GQ a year or two ago from R12, I just had the hoses replaced (original ones were cracking) and the dryer too. All up was about $280.
They couldn't get the adapter valves onto the back of the compressor or something because it was too close to the engine mount, so they just added the valves to the new hoses.
The original hoses aren't that great for r134a gas, as the new gas has a smaller molecule size so leaks out through the rubber over time.
New hoses are probably cheaper than having a re-gas every few years anyway.
They couldn't get the adapter valves onto the back of the compressor or something because it was too close to the engine mount, so they just added the valves to the new hoses.
The original hoses aren't that great for r134a gas, as the new gas has a smaller molecule size so leaks out through the rubber over time.
New hoses are probably cheaper than having a re-gas every few years anyway.
You will need to replace your reciver/dryer, blow all the oil out of the the compressor and replace with the suitable oil for the 134a, install the two new adaptor fittings for charging, and the new TX valve inline. Then its just a matter of vaccuming off to make sure you dont have any leaks (replace all O rings in system) and then fill with gas.
Conversion sould only set you back about 300 bucks all up. Its been a long time since I have done a retro fit to an R12 system so I could be out on price, but its quite straight forward.
Cheers,
KUSTOM.
Conversion sould only set you back about 300 bucks all up. Its been a long time since I have done a retro fit to an R12 system so I could be out on price, but its quite straight forward.
Cheers,
KUSTOM.
Definition of having balls: to come home drunk smelling of perfume, slapping the wife on the arse and saying 'Your next fatty"!
Who is online
Users browsing this forum: No registered users and 51 guests