Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

spark plugs diagnisis (pics)

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 264
Joined: Wed Aug 22, 2007 1:24 am
Location: Perth

spark plugs diagnisis (pics)

Post by nabstud »

I just pulled these plugs out of my 99 GU 4.5 petrol/gas. They have done just under 20,000km. The number in the pics is the cylinder it came from.

What do the all the different burn marks/colours mean? Are these rich/lean mixtures, burning oil etc?

Image
Image
Image
Image
Image
Image
Posts: 470
Joined: Wed Jan 24, 2007 12:21 pm
Location: Australia

Post by 351ciofgrunt »

No 1 looks spot on, the others look a little on the lean side.

No 5 looks like it's been getting hot, you might need to go one heat range colder plugs
Last edited by 351ciofgrunt on Sun Apr 11, 2010 1:36 pm, edited 1 time in total.
GQ Patrol Wagon, 6 point roll cage
351 cleveland, CHI heads, solid cam, Funnelweb single plane, 750 HP DP
Posts: 1256
Joined: Mon Jun 19, 2006 7:05 pm
Location: newzealand

Post by tweak'e »

is it just the pics or those spark plug gaps look a little on the big side ?
Posts: 2809
Joined: Mon Jan 02, 2006 5:03 pm
Location: Lara Victoria

Post by Ruffy »

As mentioned, 1 is spot on.. The rest look a little lean. Gaps look fine. Maybe could be closed a little for gas but they look about right for the standard petrol application.
[quote="Uhhohh"]As far as an indecent proposal goes, I'd accept nothing less than $100,000 to tolerate buggery. Any less and it's just not worth the psychological trauma. [/quote]
Posts: 112
Joined: Fri Jan 01, 2010 2:32 pm
Location: tasmania

Post by pig in shit »

Posts: 264
Joined: Wed Aug 22, 2007 1:24 am
Location: Perth

Post by nabstud »

Cheers fellas. Those pics in that link are a bit dodgy...

The gaps were at 1.1mm, The new set I put in I closed to 1.0mm. The old ones were a colder heat range (6 instead of 5) as are the new ones.

Good to know they aren't too bad.
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

I spent the extra and put platinums in mine .. the rear two are a pita to change in my opinion. Cost 3 times more last 5-6 times longer can run a bigger gap with less strain on the ignition system etc etc ..

The 1st one looks great the others look OK I certaily would not be staying up at night worrying about em.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest