After seeing others do great jobs on their bars i thought i would have a go myself.
The bar is 3.2 mm 50nb tube with a 3.2mm 25nb tube below. 3mm rhs for the mounting and support and all wraped in 3mm plate The hoop is 3" 1.6mm mandrel bent pipe with 2 spottie mounts and the uhf mount. Also have holes drilled on the plate to fit 2 250mm spoties.
Gained about 200mm on my aproach angle in the middle and about 300 on the sides compared to the old alloy bar.
Bash plate is 1 folded piece of 3mm plate
Checkerplate on the sides
Made it to suit my 2" bodylift and its held on by 8 high tensile 12mm bolts.
What do ya think? im pretty happy with it.
Cheers
Tom.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
my new DIY front tube bar
Im sure they would pull me over for the tyres before the spotties but at least now im prepared for it. Thanks ..Just a quick one the spotlights above the bar are illegal MR Plod told me the other day that they are targeting this now in brissy too . dudes just cant let any one have a good time.
I will add it to the ever growing list of DIY Defects
Who is online
Users browsing this forum: No registered users and 1 guest