IFS rear spring bushes

Post by **spazbot** » Sun Mar 14, 2004 11:03 pm

is there a trick to getting the std rubber front bushings out ??
ive tried belting them out with a bfh and also tried using the vice as a press with little luck. do i need to go get somone with a 20t press to remove them ???

Post by **high n mighty** » Mon Mar 15, 2004 5:40 am

The ones in the chassis???? They get seized in a bit. Soak in Inox for a while and use a screwdriver

Post by **spazbot** » Mon Mar 15, 2004 9:41 am

no the ones in the actual leaf spring

Post by **Old Yella** » Mon Mar 15, 2004 2:37 pm

heaps easier to press them out

Post by **4sum4** » Mon Mar 15, 2004 3:16 pm

Get the oxy and melt them out they catch alight pretty quick.

Post by **hypo** » Mon Mar 15, 2004 7:44 pm

just swap the pins ??

Post by **spazbot** » Mon Mar 15, 2004 7:47 pm

looking into that 2

Post by **RUFF** » Mon Mar 15, 2004 8:12 pm

Why do you want to remove the factory bush? You wont find another bush that flexes as good.

Post by **spazbot** » Mon Mar 15, 2004 8:14 pm

ok off to see if i can get some ifs pins from the wreckers tomorrow

Post by **hypo** » Mon Mar 15, 2004 8:16 pm

just weld some plate over the standard mounts and run a grade 8 bolt thru that

Post by **bundytunna** » Mon Mar 15, 2004 8:34 pm

i got some ifs shackles and pins
and brand new bushes as well
pm me for prices and shit

Outer Limits 4x4 Board

IFS rear spring bushes

IFS rear spring bushes

Who is online