Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

350chev efi 75series ute

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 60
Joined: Sun Sep 30, 2007 6:46 pm
Location: Gold Coast

350chev efi 75series ute

Post by redhotzook »

well there isnt much in the bible for 75series...

ive got the 3f engine in my ute and id like something a bit nicer...
350chev... 454... something like that, anyone done it? is there a conversion kit to make it fit to the current box?? is there such a thing as a fuel injected 350??
what if i wanted to put a turbo 700 gearbox in too, or something like that... is it possible? can i run a stand alone transfer case from something else?

surely someone out there has done something like this? links or pics pleaseee.

really my whole story is... my gearbox needs a rebuild ($2500) my engine is sucking 28.5litres to the hundred and is starting to make some scary tapping noises (tappets are fine),
Posts: 168
Joined: Sun Nov 30, 2008 4:44 pm
Location: Sydney

Post by popeyehj60 »

Have a look on marks 4wd adaptors to see what engines\gearboxes can be adapted to the 75 series.
Posts: 70
Joined: Wed May 20, 2009 5:47 pm
Location: WARNEET

efi chev

Post by tiny80 »

injected chevs come in heaps of sizes even gen 1 blocks had it 90 corvets
gen two is still all cast steel came in injected and carby
gen 3 alloy block and heads efi this is what i would go for
low weight and heaps of power 5.7 or 6 liter cheap commy parts and a marks kit and your off and running
or :lol: a big block 572 cast block alloy heads efi but a to hold that big horse power big $$$$ upgrades to every thing gear box diffs chassie ect
lifted and locked 80 series landcrusier
turbo 1 fzfe straight gas 35" claws and heaps more crap inside
Posts: 60
Joined: Sun Sep 30, 2007 6:46 pm
Location: Gold Coast

Post by redhotzook »

yea? jease it would have to be pulling pretty freaking hard to damage a cruiser! i was thinkin to myself... well these things are pretty solid to start with so i rekon ill be pretty rite with putting anything into it.
but maybe i thought wrong.

the thing is ive got about 30 sets of 350heads and bare blocks, and about 4 sets of 454 heads just laying round in my old workshop. so i kinda want to build something around that stuff to save the coins...

marks conversions? is that a company? or is that a bloke on the forums?
Posts: 177
Joined: Mon Sep 28, 2009 10:03 pm
Location: caboolture

Post by anzac »

marks 4wd adaptors is the company

http://www.marks4wd.com/

look under 'products', 'engine conversions', then pick your cruiser and it gives you all the options.

Some of their stuff is expensive but most of it is pretty good.
Beaut Utes and 4x4's - Driving your dollar further off road

Call Matt - 0411 563 300

[url]beautute.com.au[/url]
lockers, tyres, tube bar work, ute chops
Posts: 60
Joined: Sun Sep 30, 2007 6:46 pm
Location: Gold Coast

Post by redhotzook »

hmm they have some good kits on that site. nothing to fit a 454 though... but i guess a bit of work put into a 350chev and the truck should hoon along quite well.

now to the next bit, anyone got a 350 short motor laying around?? in need of a rebuild preferably. cash paid. 4 bolt mains prefered but either or.

thought i had the block sorted but the old boss wasnt too keen on selling me one of his blocks, silly old bugger holds onto stuff way tooo long.
Posts: 348
Joined: Sun Aug 23, 2009 9:55 am
Location: Brisbane

Post by VooDoo »

These days you can put EFI and electronic throttles on pretty much anything. One of the challenges i had years ago with a 350 was the 650DP overfueling at weird angles. No such issues with EFI on a 350/454 anymore


http://www.eficonnection.com/eficonnection/default.aspx
Posts: 60
Joined: Sun Sep 30, 2007 6:46 pm
Location: Gold Coast

Post by redhotzook »

oh thats handy! theres a couple second hand systems floating round on ebay luckily.

well ive got the 350! just gotta put the money through and wait for delivery, then its rebuild time!
i priced up EVERYTHING i could possibly need including stage 2 cam, water pumps, mechanical fuel pumps, forged flat top pistons, bearings seals full gasket set, head bolts and oil pump, it all comes to $1100.

ill throw up the pics as im machining everything as im sure someone might find it interesting.

then ill order one of those marks kits and throw that in, and then get it on the road and see how it goes :D

anyone out there done it before???
Posts: 71
Joined: Tue Mar 16, 2010 1:07 am
Location: perth, west. aus

Post by maddog_75 »

does anyone know the cost of getting a engine conversion engineered?

is it the case of doing a whole entire swap and then getting it approved or does it need to be approved in stages?

cheers
Posts: 466
Joined: Sun Oct 11, 2009 5:53 pm
Location: Pakenham, Victoria

Post by HUSSLN »

if the block casting number ends in 010 its 4 bolt mains, thats the one near the bell housing. If you didnt already know. Infact the complete casting number will tell you what it came out of and what gearbox it had bolted to it from factory.
Posts: 48
Joined: Wed Aug 12, 2009 8:50 pm
Location: townsville

Post by woodyjbh »

redhotzook wrote:oh thats handy! theres a couple second hand systems floating round on ebay luckily.

well ive got the 350! just gotta put the money through and wait for delivery, then its rebuild time!
i priced up EVERYTHING i could possibly need including stage 2 cam, water pumps, mechanical fuel pumps, forged flat top pistons, bearings seals full gasket set, head bolts and oil pump, it all comes to $1100.

ill throw up the pics as im machining everything as im sure someone might find it interesting.

then ill order one of those marks kits and throw that in, and then get it on the road and see how it goes :D

anyone out there done it before???
Im just playing with my SBC at the moment. Suggest you go an electric pump instead of the mechanical. Less of a headache with hosing etc and helps with cold starting etc. Im doing a heap of other stuff to the top end at the moment so if you got any questions let us know...

Wood
Posts: 60
Joined: Sun Sep 30, 2007 6:46 pm
Location: Gold Coast

Post by redhotzook »

oh you putting a 350 into something?
still running carby, just with an electric inline fuel pump?
Posts: 438
Joined: Tue Feb 20, 2007 7:34 am
Location: Gordonvale Queensland

Post by flyology »

Not all 010 blocks are 4 bolt mains, there are some (admittedly not many) 2 bolt mains 010's out there.
My 60 series rebuild....
http://www.outerlimits4x4.com/ftopic103004.php&highlight=

http://www.flyology.com

2006 CRV Sport (wifes car)
Posts: 41
Joined: Tue Nov 11, 2008 6:51 pm
Location: gold coast

Post by jackson.baker »

2 bolt 010 blocks are the best if you can find them get 4 bolt splayed caps fitted the strongest possible combination you can have until you go for a world, dart, merlin etc blocks. If you have a chevy converion kit it doesnt matter if its a big block or small block diesel or petrol all Chevy v8s have the same bellhousing pattern and same engine mount placement. I have played around with Chevs in 80 series cruisers and i reckon the best thing you can do is put a turbo700 box in there they have 30% overdrive so great for the highway and got a pretty low first gear. You can buy a big block and turbo 700 for under 3 grand second hand, running and with a 3 month warranty. I have a marks adapters kit for for a chev and turbo 700 if ur interested brand new still in box.
Posts: 60
Joined: Sun Sep 30, 2007 6:46 pm
Location: Gold Coast

Post by redhotzook »

it interests me.... but what about the transfer case? id like it to stay a 4x4 preferably ahahha
Posts: 41
Joined: Tue Nov 11, 2008 6:51 pm
Location: gold coast

Post by jackson.baker »

It's an adapter that goes in place of the rear extension housing of a turbo 700 and the Toyota transfer case bolts up to that it keeps your transfer case in the stock location
Posts: 86
Joined: Sun Nov 23, 2003 7:21 pm
Location: melbourne

Post by Gibonator »

Marks stuff is good but i dont like there extended bell housing idea. Heard of them flying apart with modded motors. i used all the marks power steering and alternator brackets but went with the dellow bellhousing.
getting it enginered is about 800 and u have to have a newer engine than car or it be straight gas.
FJ 73, army green ,snorkel, high mount, dual bats,draws,
Posts: 1513
Joined: Tue Oct 21, 2003 8:06 pm
Location: North East Melbourne

Post by ORSM45 »

anzac wrote:Some of their stuff is expensive but most of it is pretty good.
Most of it is good in theory. The rest you have to modify to make it work.

And they try telling you that their weld in, replacement engine mounts dont work because you aren't using their bellhousing, even though you have the engine in the same position as theirs would be in? :?

I dont like their bellhousing idea either. Too many parts to go wrong.

redhotzook,
Be prepared, not everything always works in the world of custom cars. Doesnt always go as easy as "ill just chuck a 350 into my cruiser".

My swear jar is full of custom work. :lol:

MaccA
Posts: 60
Joined: Sun Sep 30, 2007 6:46 pm
Location: Gold Coast

Post by redhotzook »

yea i know :(
having second thoughts about it...
my gearbox reallly needs a rebuild, crunching almost every gear and its a mission to keep it in 5th, keeps popping out. ahhh i hate 3F;s

everyone is asking way too much for 1hz;s aswell. guy tried to convince me that his 1hz with a broken cam and no injector pump was worth 1500, and he wasnt sure if the pistons have hit any of the valves or not.

hmm i just want a bare 1hz, if it has an injector pump, thats just a bonus, i just want, head block, crank, conrods, inlet manifold and wiring loom, thats all! all the rest ill buy new, surely someone has something like that for the $500 to $900 mark! haha
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests