Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

1985 fj62 landcruiser not running

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 21
Joined: Mon Mar 09, 2009 10:02 pm
Location: Brisvegas

1985 fj62 landcruiser not running

Post by sic60driva »

Hey everybody,
I was driving my car the other day and i noticed slight performance loss, and then a day later as i put my foot down to take off the car just slowly died in the ass, i had a mech come out and suss it out he took one spark plug out and did some sort of compression test and then turns around and tells me that the crankshaft is bent, ....... but wouldnt that stop the car in an instant? But i think its either my timing gear or my dizzy just some advice in what you fellow 4x4ers think.
cheers sic60 driva
Posts: 33
Joined: Sun Apr 18, 2010 6:12 pm
Location: melbourne

Post by buff man »

fuel- check you are getting fuel to the carby
spark- check plugs by pulling one out and wind the car over with a plug earthed out on the head. look for the spark.
compression- if it is turning over it has not got a bent crank.

i've never herd of a crank bending anyway. i've seen one clean snapped as well as cam shafts.

i dont know the engine that well but maybe it has a crank angle sensor. i know that will stop a commodore dead.

good luck !
Posts: 54
Joined: Sun Jan 17, 2010 1:08 pm
Location: Melbourne

Post by ANGRY6 »

Yeah its easy to have a bent crank, my Valiant had a bent crank. It was only 7-thou out but enough for it not to be straight. I doubt that would slow your car down every time you put your foot down.
As the others said i would be looking at basics first, fuel spark and timing.

Daniel
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests