Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

tb42 intercooler

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 37
Joined: Tue Jul 18, 2006 11:15 am
Location: shepparton victoria

tb42 intercooler

Post by rob_rover »

which intercooler for 200rwkw tb42 turbo bar and plate or tube and fin, which would suit it better?
Top
Posts: 1024
Joined: Sun Oct 08, 2006 1:29 am
Location: Right behind you and coming fast!

Post by cooki_monsta »

bar n plate is cheaper design iirc, but its what i run on mine, its only small but im only pushing 160
Maverick. Unlocked on 35's MOTTO: Lock, Stomp & Hold on
Top
Posts: 37
Joined: Tue Jul 18, 2006 11:15 am
Location: shepparton victoria

tb42 intercooler

Post by rob_rover »

lookin at 600x300x76 with 2.5" inlet/outlet, or would one with 3" inlet/outlet be better for flow? and with design is better for cooling? cheers for the reply
Top
Posts: 1258
Joined: Wed Mar 21, 2007 7:49 pm
Location: Mornington/ Victoria

Contact:
Contact PGS 4WD

Post by PGS 4WD »

Go with the 3". Have made 380 rwkW through ebay bar and plate, air temps getting a bit higher but at 27 psi that's expected. At boosts up to 15 psi air temps only a couple of degrees over ambient.
Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 7 guests