Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Rewiring Headlights

For all things Electrical.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 206
Joined: Thu Sep 02, 2004 4:32 am
Location: Jamaica/(Haiti)

Contact:
Contact Lawrence

Rewiring Headlights

Post by Lawrence »

What is the standard wiring used on the gq and what should I upgrade to in order to get brighter lights?
89 gq dx. bone stock --- for now.
Top
Posts: 399
Joined: Sat Oct 31, 2009 9:16 pm
Location: Nth Richmond. NSW

Re: Rewiring Headlights

Post by Black Bull »

Lawrence wrote:What is the standard wiring used on the gq and what should I upgrade to in order to get brighter lights?
I think it's 1.5mm.

If your going to upgrade to 100w + globes I'd run a minimum 2.5mm feed to each headlamp from the relay
Top
Posts: 206
Joined: Thu Sep 02, 2004 4:32 am
Location: Jamaica/(Haiti)

Contact:
Contact Lawrence

Post by Lawrence »

Ok thanjs Black Bull. Howmuch of a difference will that size make with the standard light?
89 gq dx. bone stock --- for now.
Top
Posts: 399
Joined: Sat Oct 31, 2009 9:16 pm
Location: Nth Richmond. NSW

Post by Black Bull »

IF your using standard 55/60 watt globes, upgrading the wiring won't make much if any difference at all.

It is neccesary though if you upgrade to larger globes, I rewired Moose's Patrol last week after one of his plugs had melted and still have to do my Falcon :oops:
Top
Posts: 140
Joined: Fri Aug 24, 2007 9:22 am
Location: Zeerust

Post by yorgerg »

I need to do something similar to my pathy, what sort of relay would be used for this application.

It seems old pathy's had the power running through the arm on the steering wheel, and it tends to short out a lot, up to my third arm :x
Is there a 'standard' relay to be used, or can i just visit the local electronics store for some relays??



Maso
Top
Posts: 399
Joined: Sat Oct 31, 2009 9:16 pm
Location: Nth Richmond. NSW

Post by Black Bull »

Depends on how the circuit is or how you want it to be wired, in most cases yeah just use one 4 or 5 pin relay for Hi and another for low.

Try Bursons they have the bosch ones in stock, I find them the best ;)
Top
Posts: 33
Joined: Fri May 11, 2007 8:44 pm
Location: Sydney

Wiring upgrade

Post by bundyrulz »

G'day,

I rewired the headlights on my GU. I was running higher wattage globes and the H4 plugs melted. If your gonna do this I would recommend using ceramic H4 plugs. I got mine from www.larpro.com.au

I also used the heavy duty relays(40amp) for each globe switched off each globes power wire.

There are some upgrades which use your existing H4 plugs for the relay switching signal. I thought this was messy and with melted plugs would not work for me. I have mounted my relays right next to the main battery. This gives me a nice short thick power wire to the ceramic H4 plugs.

I'm very happy with the output and have measured it all up so I can duplicate it for my missus and mates GU's.

Bundyrulz
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

I just fitted an out of the box an ARB M002 loom.

Plugs straight in.

Bazzle
Top
Post Reply

Return to “Auto Electrical”

Who is online

Users browsing this forum: No registered users and 0 guests