Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

brake fluid

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
msg
Posts: 37
Joined: Mon Aug 10, 2009 9:04 pm
Location: home

Post by msg »

Ok you got me curious, what are you going to do with the other 9 litres of brake fluid becouse I cant see you using more than 1 litre. And it looks like it does not matter what fluid is in car all ready dot3 and dot 4 can be mixed . Thanks everybody for their replies.[quote][/quote]
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

u can easy use more than a 1-2L per car if you are flushing the system
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

the resevoir on mine is pretty big(ABS), looks like it holds 1-2 litres on its own

plus we are flushing the whole system

I will be pulling my calipers off and pushing the pistons right back too (as im doing wheel bearings aswell)

I did not want to run out of fluid half way through our flush, so i got plenty.
03 HDJ100R GXL / 94 FJ45-80
Top
Posts: 212
Joined: Tue Jan 19, 2010 10:35 pm
Location: Brisbane

Post by TroopiePete »

Cool

Can't wait for the photo's! :cool:

I'm now confused!
This comment is totally out of context?
I will be changing back to Dot3 ASAP.
Last edited by TroopiePete on Mon Apr 26, 2010 10:31 am, edited 1 time in total.
Peter - VK4FSD
Toyota 78 Series Troopy 4.2 TD Locked and loaded.
River City 4WD Club - President and Bulletin editor
Top
Posts: 1143
Joined: Sat Feb 10, 2007 6:11 pm
Location: Canberra

Post by chunks »

We had a new Prado a few years ago shit a master cylinder with Dot4. We now use whatever the reservoir cap says just to cover our ass. We had previously been using dot 4 only for many years.
Top
Posts: 792
Joined: Wed Feb 16, 2005 7:20 pm
Location: Acting the goat.

Post by BowTieGQ »

Read somewhere recently, I think the Nissan dealers' own manual, that Dot3 and Dot4 should not be mixed. It then stated that Nissan supplied vehicle with Dot3 from factory. Again, make of that what you will.
[quote="bazooked"]can i use a mate to position while i screw? :twisted:[/quote]
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 55 guests