Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Sill Height of Standard Zook [sierra ]

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 654
Joined: Thu Nov 28, 2002 10:04 am
Location: Central Coast

Sill Height of Standard Zook [sierra ]

Post by Bentzook »

I need to find out the standard sill height of a zook [sierra] ?

The engineers needs to know the standard height of a zook vs the height of my Gravitron zook. Getting it engineered with 35s on it seem to be impossible, I`ve got a set of 33s he thinks will pass. But I need the ride height at sill level, I may have to lower mine, just for the engineering stage, [ lift it up again later ].
"Gravitron " : drives the first layer of Gravity
Top
Posts: 3443
Joined: Tue Oct 29, 2002 10:50 pm
Location: Currently On the Road !!

Post by Dozoor »

Local engineer ?

lakes edge :)
'
Top
Posts: 654
Joined: Thu Nov 28, 2002 10:04 am
Location: Central Coast

Post by Bentzook »

Athol
"Gravitron " : drives the first layer of Gravity
Top
Posts: 736
Joined: Sun Jan 30, 2005 2:32 pm
Location: brisbane

Post by gumtree »

i got one here i can measure. do u want it sitting on level ground and measured from the ground to the bottom of the sill.


also i have 205/70R15 tyres on there so its as low as it gets. stock springs too.




ok just went and did it anyways. 41.5cm at the bottom of the sill (approx the middle of the door) to the floor.
1993 LWB vitara, Front & Rear alloy bars, towbar, spotties, UHF.
Top
Posts: 654
Joined: Thu Nov 28, 2002 10:04 am
Location: Central Coast

Post by Bentzook »

thanks buddy.

With my 35s on I`m 13.4 " higher
"Gravitron " : drives the first layer of Gravity
Top
Posts: 995
Joined: Sun May 01, 2005 2:55 pm
Location: Tamworth

Post by Turbo Tonka »

how much higher are you allowed to be.Sounds high when you put it like that,but it looks the goods :cool:
sierra truggy,37 sticky treps,propane,6.5s and disconnect,lux diffs with spools,16" fox shox,hydro steer.
Top
Posts: 26
Joined: Thu Aug 06, 2009 5:08 pm
Location: Perth

Post by Ben_Sierra »

gumtree wrote:i got one here i can measure. do u want it sitting on level ground and measured from the ground to the bottom of the sill.


also i have 205/70R15 tyres on there so its as low as it gets. stock springs too.




ok just went and did it anyways. 41.5cm at the bottom of the sill (approx the middle of the door) to the floor.
If they are stock springs they've probably sagged a bit from the original height...

I'd add another couple of cm to get the "factory" height...
Suzki 4x4 Club of WA - [url]http://home.offroad.com/~suzukiwa[/url]
Top
Posts: 3443
Joined: Tue Oct 29, 2002 10:50 pm
Location: Currently On the Road !!

Post by Dozoor »

Bent zook , Whats the distance between the bottom of chassis rail and ground?


Ancient thread http://www.outerlimits4x4.com/ftopic33747-0-0-asc-.php
Top
Posts: 654
Joined: Thu Nov 28, 2002 10:04 am
Location: Central Coast

Post by Bentzook »

Crh : 560mm 22"
"Gravitron " : drives the first layer of Gravity
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 2 guests