have a 4.2 diesel ford maverick
using penrite hpr 20w 60 oil
i have changed oil filters from z115 to donaldson filters made no differance oil light still stays on for at least 6 sec
oil pressure at idle when cold 60 psi
when hot at 100 klph in 5 gear still 60 psi
my after market electric sparco oil pressure gauge the needle some times jumps between 50 - 60 psi
could some one please explain to me or tell me how to cure oil pressure light staying on for so long and why my aftermarket gauge needle jumps around thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
oil pressure
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Who is online
Users browsing this forum: No registered users and 125 guests