Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Rear Clunk

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 114
Joined: Fri Jun 02, 2006 11:10 pm
Location: Northern Beaches, Sydney, Australia

Rear Clunk

Post by da13ro »

I have read through a bunch of other articles about similar 'sounds' coming from the rear and it looks like there are a couple of possible causes. Since I don't exactly know much of the terminology was hoping that someone could narrow it down a bit further and advise on some checks. It is a 97 coily sierra, tin top with 30's & 1 1/2 suspension lift...

So it happends 99% of the time taking of from standing. You hear a clunk sound and a little thud go though the car. it happends 50% of the time through cornering (doesn't matter if you are accelerating or not through. And probably about 75% of the time changing from first to second, as well as jabbing the throttle.

Looking under the car the uni's all seem snug, there is about 2cm roll play in the (tailshaft?) that goes from the transfer into the rear diff.

When I have the car with the handbreak on - shake it back and forth I notice a little bit of roll in the diff (where it attaches to the trailing arms). So basicly im not too sure what I should be looking at, whether I should pull the diff out and check inside? (Pinion?) Or if its something else.

The car does have a locrite which was fitted but recently removed, I am thinking this could of had something todo with it? If putting it back in might solve it I am all for it.

Thanks for ya times guys...
- Exciting stock 96 Coily Sierra...
- Custom Roll Bar
- Diff breathers
30/31's to come...
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Post by alien »

first thing to check is your u-bolts and shackles are all done up... as they can come loose (especially the u-bolts) and create a clunk as the spring moves around on the perch.

after that you're almost guaranteed that its the diff... you can check this by jacking up the rear (both wheels) and start it up and idle in 1st gear - then grab one of the wheels - it should stop turning and the other continue turning (thats why we buy lockers) - usually on doing this you can replicate the clunk if its the diff - although it usually transfers the sound through the axle and sounds like its at the hub.

if it is the diff you really have 3 options, in order of price:
- weld the diff
- replace the centre
- airlocker

Now you just have to hope its a loose u-bolt =P
The worst thing about censorship is ███████.
Posts: 189
Joined: Sun May 18, 2008 11:41 am
Location: Anywhere

Post by lockdup »

ITs a coily
5.12, 34" SUPERSWAMPER, REAR AIR LOCKED
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Post by alien »

well theres your problem!!! no ubolts OR shackles!!! best to go buy some and weld them on.
The worst thing about censorship is ███████.
Posts: 114
Joined: Fri Jun 02, 2006 11:10 pm
Location: Northern Beaches, Sydney, Australia

Post by da13ro »

Haha gottit - weld em on - tighten them up problem solved!

Ill try your other idea probably first though and see if I can replicate - I suspect I will be able to...bummer

So if it was the diff, I can pull the center out and look for obvious signs, if its a no show would re-installing the locrite possibly solve this?
- Exciting stock 96 Coily Sierra...
- Custom Roll Bar
- Diff breathers
30/31's to come...
Posts: 13
Joined: Sun Feb 14, 2010 6:25 pm
Location: Melbourne, Australia

Post by Neofitou »

You probably should have mentioned the lockright in the first post..

This would be normal behaviour with it installed, but seing as its come out it could be that when you pulled out the locker the backlash wasnt setup right or maybe you didnt re-install the shims on the outside of the side gears..

Grab a feeler guage, pull it apart, and reset it up per the book..
Posts: 396
Joined: Mon Jul 17, 2006 10:37 pm

Post by WRXZook »

Have you checked engine/transmission/tc mounts?
Posts: 11
Joined: Fri Apr 10, 2009 3:50 pm
Location: Cessnock

Post by jimy4b »

hey mate had this exact same thing in my jimny i found out that it was 1 of the pinion shafts that the sun gears in the diff run on had snaped at a 45 degree angle. to fix the problem arb air locker fixed it 4 me $1200 but yeah hope that helps. cheers
JIMNY- Squeeze Between The Shit It Cant Drive Over...
Posts: 115
Joined: Tue Sep 30, 2008 10:55 am
Location: Beaudesert

Post by P@nda »

The most common cause of the noise is the rear trailing arm rubbing
against the diff mount through the suspension cycle. Mine did it A LOT!
Just make sure the bolts are all tight and grease them occasionally. The
noise will never go away (unless you change the arm) but you can make
it quieter. :lol:
96 Coily, 100mm lift, Jimny Front Diff, 4.09 diff gears, Reduction gears, 30" Trepadors, 6 Point Rollcage, Custom Bash Plates, Open diffs to give the big guys a run for their money!!
Post Reply

Who is online

Users browsing this forum: No registered users and 30 guests