Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Removing intake resonator

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 18
Joined: Sat Mar 29, 2008 5:14 pm
Location: Grafton

Removing intake resonator

Post by dmarsc10 »

G'day has anybody removed the intake resonator from the air filter of a 3.2l diesel Navara, or any other smallish diesel motor for that matter. Any difference in performance without it?
I will be installing a snorkel soon (maybe a custom??) and it would be sweet if i could do away with the resonator box and hook straight to the main air filter box.
Cheers.
Top
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

I haven't done it on a small diesal, but on the Toyo 3Lt V6 it makes a noticeable difference to throttle response. Doesn't really give you heaps of grunt or anything but a worthwhile mod in my view.

Cheers
Top
User avatar
DamTriton
God of Athiests
Posts: 8336
Joined: Thu Aug 07, 2003 2:14 am
Location: Brownsville

Post by DamTriton »

They weren't put there by accident, and they wouldn't be there if they didn't do something.

If it works, don't fix it.
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Top
Posts: 817
Joined: Fri Jun 17, 2005 9:23 pm
Location: Sydney

Post by TheOtherLeft »

AFAIK resonators are put on to quieten down the intake noise at particular frequencies/RPM level, so is purely for cosmetic/aesthetic reasons. I have 2 on my suzuki and removed the bigger one when I installed snorkel. Other then a bit more intake noise I've not noted any real difference.
Top
Posts: 2297
Joined: Mon Mar 06, 2006 1:23 pm
Location: Melbourne-Australia

Post by MightyMouse »

I asked the same question myself and was lucky enough to be able to direct it to a engineer who did some of the manifold/intake design on a couple of vehicles.

He indicated that these resonators ( Hemholz ? ) were indeed to damp specific resonances but somewhat to my surprise these often showed up as external noise and could effect driveby noise measurements - and therefore had to be damped.

I'm sure that the resonances would probably be heard internally as well but it didn't seem to be his major concern.

As for power / torque etc - no effect.
( usual disclaimers )

It seemed like a much better idea when I started it than it does now.
Top
Posts: 18
Joined: Sat Mar 29, 2008 5:14 pm
Location: Grafton

Post by dmarsc10 »

thanks for the replies. If it is only for the redustion of noise i think i will get rid of it when i install a snorkel. One less join to worry about leaking i reckon and a more direct path for air flow.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 0 guests