Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 series speedo head (I think)

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 5
Joined: Sat Jan 28, 2006 5:18 pm

80 series speedo head (I think)

Post by RR308 »

Does anyone have a working speedo head for my 80, its a petrol, auto with electonic speedo,
It doesent move the needle but the odomiter still works,
Any ideas anyone?
Top
Posts: 68
Joined: Thu May 21, 2009 8:27 pm
Location: tassie

Post by brissle »

ha my needle moves and odo dont work, not such a problem though,
Not that it helps you. Sound like a cluster prob though
Top
Posts: 986
Joined: Tue Nov 11, 2008 7:17 pm
Location: Brisbane

Post by TheBigBoy »

Easiest solution, get a new cluster from the wreckers. It could be that someone has tampered with your gauges IE. Winding the clock back. You have to remove the needle completly to remove the panel infront of the taco. And if the pin is pushed back too tighly it binds on the speedo face.

(Not that I know or have every done this) :)
Top
Posts: 5
Joined: Sat Jan 28, 2006 5:18 pm

Speedo

Post by RR308 »

Thanks guys, the speedo needle used to work then it just stopped.
Does anyone know of a wrecker who doesent want $300 for a speedo head ?
Top
Posts: 20
Joined: Wed Apr 01, 2009 6:08 am
Location: Brisbane

Post by wrinkled bits »

have you tried unplugging the wiring at the gear box, cleaning, and reconnecting, i had the same problem, but has now been working well for months. good luck.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 2 guests