Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

9 inch for hilux????

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
User avatar
mav
Posts: 320
Joined: Thu Jun 26, 2003 1:53 pm
Location: traralgon victoria

9 inch for hilux????

Post by mav »

a mate bought a s/hand 9 inch diff for the rear of his hilux when he pulled the axles and centre out, we found 30 spline axles !!! it runs standard hilux brakes and i think they are hilux axles ???
how does this work is it special spider gears in the diff how does he go about getting a locker to suit???
see ya mav
Posts: 701
Joined: Tue Feb 03, 2004 3:04 pm
Location: Melbourne

Post by 80UTE »

Should put a cruiser diff in the back then you can fit a std locker and it uses all std parts (except housing) :!:
Posts: 638
Joined: Mon Nov 04, 2002 7:52 am
Location: A little north of sydney

Post by dave »

Double check that the axles are standard hilux, if so then the side gears have to have been changed. If so ring ARB"s head office and speak to someone in a technical department, Alot of there side gears are interchangeable between there lockers.It all depends on the locker sizes.
Dana 44 side gears fit into a hilux locker.
Posts: 1040
Joined: Sun Dec 22, 2002 11:15 am
Location: sydney

Post by planb »

i have seen hilux axles in ford housings, front and rear even with Grimace toy cv's !!

supposively the spring perches dont need to set out board or inboard, they're a straight bolt in/

providing your 9in came out of a ford 4wd pick up
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Post by bj on roids »

thats the Grimace, unless it started life as a 28 spline 9" why would you go to all that custom work to have hilux axles, 31spl 9" custom axles can be had cheaper and stronger. i thought..... :armsup:
hands and mums dont count!!!
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests