Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ SWB slider mounting Advice

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

GQ SWB slider mounting Advice

Post by Screwy »

Gday guys,

Im sure loads of you have them and loads of you have had to work this out....

My SWB had some shit side steps on it when i bought it and they were mounted poorly.

ive cut them off and have just finished bending up my slider rails.

I am interested to see how others on outers have mounted there sliders...

I can easily run 2 mounts and it will be strong enough for most use, however i want to be able to run an exo cage off this sometime in the future possibly.....

GQ SWBs have alot of shit in the way on the outer chassis rail, front area has body mount and lower control arm mount and gearbox crossmember mount, and right at the back has the rear lower control arm mount and chassis.....

any pics of ppl who have work this out would be great. I have a few ideas in mind though other ideas i cant see are very appreciated.

Cheers

Screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 1321
Joined: Tue Aug 03, 2004 7:56 pm
Location: Jamisiontown NSW

Post by MARKx4 »

Jeff, my shorty sliders had a U shape made out of plate and bolted through the top over the chassis, alot easier if you have a body lift which mine didnt but i just massarged the floor to make the room and it also had a bolt through the body mount at the front aswell. It was very strong and didnt move, if i have pics ill sms them to you.

Mark.
Its not cool, unless it's got boost :)
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

MARKx4 wrote:Jeff, my shorty sliders had a U shape made out of plate and bolted through the top over the chassis, alot easier if you have a body lift which mine didnt but i just massarged the floor to make the room and it also had a bolt through the body mount at the front aswell. It was very strong and didnt move, if i have pics ill sms them to you.

Mark.
So only 2 mounting points???

I want 3 and want them to be closer to the edges so if i ever do an exo cage they will be strong enough.....

Screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 1321
Joined: Tue Aug 03, 2004 7:56 pm
Location: Jamisiontown NSW

Post by MARKx4 »

Sorry 3 mounting points, 2 around the chassis and one to the body mount.

Mark.
Its not cool, unless it's got boost :)
Top
Posts: 5
Joined: Tue Jan 12, 2010 2:24 pm
Location: Brisbane

Post by steve89mav »

here's how mine fit..
Top
Posts: 5
Joined: Tue Jan 12, 2010 2:24 pm
Location: Brisbane

Post by steve89mav »

hmmm wont let me post pic/URLs yet..
Top
Posts: 5
Joined: Tue Jan 12, 2010 2:24 pm
Location: Brisbane

Post by steve89mav »

no.4
Top
Posts: 5
Joined: Tue Jan 12, 2010 2:24 pm
Location: Brisbane

Post by steve89mav »

here is how mine fit.. (gap is because of 2" body lift)

Image




Front mount:

Image



Rear mount:

Image
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

anyone managed to get a rear mount any further back then the rear lower control arm???

Screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests