Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

clutch

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 8
Joined: Tue Jan 19, 2010 8:46 pm
Location: Langwarrin, Melbourne

clutch

Post by VERGIE »

hey guys, got stuk in a bog hole on the w.e and tore open the boot on my slave cylinder.. now thers a whole heap of gunk stuck between my pressure plate (i think)...

how do i fix this? take the transmission out? because thers no inspection plate..

also is there anything i can do to prevent this happening again? a bash plate of sum sort or something?

thanks
Top
Posts: 305
Joined: Mon Apr 21, 2008 8:53 am
Location: New Zealand

Post by garth »

used to get mud and sand from rivers and bogs stuck in clutch. I removed bung from bottom of bell housing and flushed with hose to get rid of kak then over the course of a few days it would dry and stop 'clutch shudder'.

I used sika to seal the boot, bell housing and bung.....never even gets wet now.

good luck
GQ with 30 PSI of TD42T.........
Top
Posts: 54
Joined: Mon Mar 01, 2010 2:00 pm
Location: Elimbah Qld

Post by v8maverick »

Seal the boot to the bellhousing and the fork with silicon. works a treat.
Ford maverick with 5.0L EFI windsor
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests