hi all iv got a stock 86 2.4 d hilux and im about to put ifs rears in and ruf im just wondering if/what size tailshaft spacer any help would be great
cheers james
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
hilux gen 2 susp
Moderators: toaddog, Elmo, DUDELUX
hilux gen 2 susp
if lifes a bitch.............deaths a sl*t cause death cums 4 all of us
wont be a tail shaft spacer, you will find you will need th lengthen the drive shaft.
It moves the diff forward plus adds lift.
Tail shaft spacers make the angle of thew front uni more and will likely cause it too vibrate/ bind up.
Brad
It moves the diff forward plus adds lift.
Tail shaft spacers make the angle of thew front uni more and will likely cause it too vibrate/ bind up.
Brad
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
nah mate, not unless you are a machinist and can make your own, you usually only buy a 25mm one... yours will need to be bigger then that, install the ruf and measure it... for the effort and price just extend the drive shaft.
brad
brad
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
Who is online
Users browsing this forum: No registered users and 1 guest