basically just wondering would it be a fairly simple swap or would it need new mounts welded to the diffs?
and also what are the diff ratios in them like?
and are they much wider than the standard 75series diffs?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
60 series diffs under 75 series troopie?
Moderators: toaddog, Elmo, DUDELUX
They are about 2" wider per side.
Ratio choices are as normal (4.11)
You will need to change the mounts on the diff and you will also run into issues with the ubolt closest to the diff pumpkin.
There are plenty of threads on here all about this.
Ratio choices are as normal (4.11)
You will need to change the mounts on the diff and you will also run into issues with the ubolt closest to the diff pumpkin.
There are plenty of threads on here all about this.
Locktup4x4.com.au - For all of your hardcore gear
Outlaws4x4.com
Outlaws4x4.com
Who is online
Users browsing this forum: No registered users and 1 guest