I've just put a (known working) subaru leone alternator (IC Reg) in my samurai (fits without modification!) but it isn't quite working right. The alternator light on the dash stays lit dimly and the voltage goes way up to around 17V if I rev it. The wiring in the zuk has taken a bit of a hammering -- I'm still chasing up bad earths etc. after it got sunk the last time, so I'm wondering if this could be caused by a wiring issue.....
The feedback wire for the reg on the small plug on the alt should just be connected to +12V when the engine is running, correct?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Alternator issues after subaru retrofit
Not easier at all (the subaru one bolts straight in), and any alternator will work electrically -- a 3 wire alt is a 3 wire alt. Turns out the VR in the alternator has quit.
Of course, if I had found a falcon alternator for the right price I would have gone with one, since they have a much higher output than the leone ones. Not terribly easy to find stuff like that over here (NZ) as most of it ends up at wreckers who charge ridiculous prices -- I'm not paying over $100 for a second hand alternator!
Of course, if I had found a falcon alternator for the right price I would have gone with one, since they have a much higher output than the leone ones. Not terribly easy to find stuff like that over here (NZ) as most of it ends up at wreckers who charge ridiculous prices -- I'm not paying over $100 for a second hand alternator!
Could anyone clarify exactly what falcon alternator fits? And do they just require a pulley swap to fit or more?
Is this the right one? http://www.trademe.co.nz/Trade-Me-Motor ... 257846.htm
(not that I plan on buying another second hand one, had enough of that carry on!)
Is this the right one? http://www.trademe.co.nz/Trade-Me-Motor ... 257846.htm
(not that I plan on buying another second hand one, had enough of that carry on!)
Who is online
Users browsing this forum: No registered users and 3 guests