Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
I have seen a couple of references lately on using the void that is within a spare wheel, mounted on the back, as a good storage unit.
Perhaps someone will find it useful, does not look to hard to make one up.
It requires that the spare is turned around which may mean fabricating alternative mounts, in this case some Merc G-Wagens have the spare mounted this way from the factory.
if you open the link it shows a photo of it out of the spare
It uses a backing plate with the stud pattern of the car so you just tighten the wheel nuts to hold the rim on over the backing plate. The front panel is attached to the backing plate via 4 rods.
Beaut Utes and 4x4's - Driving your dollar further off road
Call Matt - 0411 563 300
[url]beautute.com.au[/url]
lockers, tyres, tube bar work, ute chops
