Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

85 Rocky Handbrake

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Post Reply
Posts: 6
Joined: Wed Jan 21, 2009 7:59 pm
Location: Morayfield

85 Rocky Handbrake

Post by toastedsanger »

Hey All,

Got an 85 Rocky, have fitted new brakes, machined drums etc and no matter what we do can't get the handbrake to engage properly. Have adjusted it inside drums and at the cable underneath? Any ideas?
Posts: 3099
Joined: Wed Dec 11, 2002 10:55 am
Location: Central Queensland

Post by BundyRumandCoke »

Guaranteed, one or both handbrake cable inners are siezed.
Mud makes excellent toothpaste.
Posts: 327
Joined: Wed Apr 05, 2006 7:44 am
Location: Greece

Post by ferozamaniac »

Its wrong to adjust it from the cable underneath, have you changed the cable with a new one ?
www.ferozaclub.gr
[url=http://www.ferozaclub.gr][img]http://i51.photobucket.com/albums/f387/heroicentaur/forum/sign.gif[/img][/url]
Posts: 6
Joined: Wed Jan 21, 2009 7:59 pm
Location: Morayfield

Post by toastedsanger »

ferozamaniac wrote:Its wrong to adjust it from the cable underneath, have you changed the cable with a new one ?
Not yet, thought I would check on here obviously will need to do that. Thanks Fellas
Posts: 6
Joined: Wed Jan 21, 2009 7:59 pm
Location: Morayfield

Post by toastedsanger »

ferozamaniac wrote:Its wrong to adjust it from the cable underneath, have you changed the cable with a new one ?
Not yet, thought I would check on here obviously will need to do that. Thanks Fellas
Posts: 51
Joined: Mon Feb 22, 2010 8:24 am
Location: Clarence, Tasmania

Post by alex.tas »

when you say it wont engage properly, do you mean that it doesnt fully brake? I have the same issue, my driveway is kinda steep and i'm a bit concerned that it one day will roll into my retaining wall.
Posts: 6
Joined: Wed Jan 21, 2009 7:59 pm
Location: Morayfield

Post by toastedsanger »

alex.tas wrote:when you say it wont engage properly, do you mean that it doesnt fully brake? I have the same issue, my driveway is kinda steep and i'm a bit concerned that it one day will roll into my retaining wall.


Yup exactly scares the hell outta me too
Posts: 6
Joined: Wed Jan 21, 2009 7:59 pm
Location: Morayfield

Post by toastedsanger »

Ok have replaced the cable with a newie, still doesn't wanna hold. Any ideas?
Posts: 327
Joined: Wed Apr 05, 2006 7:44 am
Location: Greece

Post by ferozamaniac »

Take a look on the Rocky brake system manual

http://www.warfs.org//manuals/F70_F75_F ... System.pdf

page 13 parking brake lever


I would suggest to take off the drum and hold up the handbrake to see if the brake pads are moving at all.
www.ferozaclub.gr
[url=http://www.ferozaclub.gr][img]http://i51.photobucket.com/albums/f387/heroicentaur/forum/sign.gif[/img][/url]
Posts: 51
Joined: Mon Feb 22, 2010 8:24 am
Location: Clarence, Tasmania

Re: 85 Rocky Handbrake

Post by alex.tas »

did you find the issue? because my hand break is now completely screwed.
Post Reply

Who is online

Users browsing this forum: No registered users and 14 guests