Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

rear main seal in 2.8

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

rear main seal in 2.8

Post by thehanko »

I cant believe I sold my hilux last thursday... then today my house mate said I think I want a hilux...

I could have strangled him as mine was really good nic and well maintained. :roll:

anyway we looked at one today which was in average nic but nothing too urgent except for it was leaking a fair bit from the rear main seal. 2.8 diesel. ln106

IM assuming this is a gear box out kind of job and that the seal is cheapish but the work to do it is significant.

im well versed in luxs but not this job.

How hard is it, whats it cost.

Has anyone had it done at a mechanics? if so what did it cost.

after some fairly quick advice as he is looking to buy before this weekend...
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Top
Posts: 28
Joined: Sat Dec 19, 2009 6:02 pm
Location: Newcastle.

Post by Red868 »

hardest thing is getting the gearbox in and out.
i did it with my 2.4 hilux. its just a case of remove to old seal check for any marks on the housing tap the new one in. put flywheel clutch and gearbox back on.
the seal wont cost you anymore then $20.
hope this helps
Top
Posts: 658
Joined: Wed Feb 13, 2008 5:41 pm
Location: Brissy

Post by yamaha__308 »

Piece of piss, between you and a mate and a trolley jack. Do the clutch while its out.

Mechanic will take you from behind.
Top
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

very helpful. god knows when we would find the time though :lol:

Thanks
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Top
Posts: 43
Joined: Mon Jul 31, 2006 7:44 pm
Location: in front of screen

Post by ShAgGS »

if you do a seal, use a genuine toyota seal, there about $70..money well spent..

after market cheap seals are crap and will leak in a very short time.
lux, few mods, many more to go.
Top
Posts: 139
Joined: Wed Jun 18, 2008 7:51 pm
Location: NSW

Post by highwaychook »

New rear main oil seal, new clutch, new G/B oil, and labour of course. $700
Top
Posts: 99
Joined: Sat Feb 09, 2008 6:44 pm
Location: Blue Mountains NSW

Post by howesy »

Most mechanics will come in with a quote of around $450 drive in drive out.
I think they allow around 5hrs labour in the book.
My 2.8 they did the seal and a new fork pivot for the $450
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest