Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

warn winch trouble pls help

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 23
Joined: Tue Mar 31, 2009 6:23 pm
Location: GOSFORD

warn winch trouble pls help

Post by BIG BETTSY »

hi everyone i have a winch was working took it off to paint bar and now ive put it back together just clicking in solinoid box.it wont wind in or out
any help be appreciated thanks troy
Top
Posts: 87
Joined: Sat Nov 29, 2008 3:10 pm
Location: Sunshine Coast, Qld

Post by antpoo69 »

give all the terminals a clean in the control box. could just be a build up of dirt causing it to not get full power.

could also be dodgy solanoids but it's a bit weird for both of them to die at the same time.
Top
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

get a mulitmeter or test light... or interior light globe and bit of wire and test to see if current is getting to the terminals on the winch when the solenoid goes 'click'.

forward 1 should go live, reverse another should go live. if not look at solenoids.

if currnt is getting to winch, look at connections particularly your earth.

winches draw big power so need good connections to work.
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest