Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Cheezy racing front bar, tow hook mods

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

picture of inside the front bar to show that they pass through and get welded in the back as well.....

Image
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

Looks good .. the only thing I would have done different is to make the recovery points a |-- shape with the vertical bit behind the bar.
This would mean that the welds would not be doing all of the work.
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

love_mud wrote:Looks good .. the only thing I would have done different is to make the recovery points a |-- shape with the vertical bit behind the bar.
This would mean that the welds would not be doing all of the work.
interesting point, didnt think of this. may look at this next time....

I believe what ive done should be strong enough to do whats required though.....

Ive seen much much worse out there

Screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
User avatar
Tiny
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Contact:
Contact Tiny

Post by Tiny »

Screwy wrote:
love_mud wrote:Looks good .. the only thing I would have done different is to make the recovery points a |-- shape with the vertical bit behind the bar.
This would mean that the welds would not be doing all of the work.
interesting point, didnt think of this. may look at this next time....

I believe what ive done should be strong enough to do whats required though.....

Ive seen much much worse out there

Screwy
looks good mate, I know this was bugging you :D

hows the rest coming along for RD3?
If the above post did not offend you in any way please PM me so I can try harder!!
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

Tiny wrote:
Screwy wrote:
love_mud wrote:Looks good .. the only thing I would have done different is to make the recovery points a |-- shape with the vertical bit behind the bar.
This would mean that the welds would not be doing all of the work.
interesting point, didnt think of this. may look at this next time....

I believe what ive done should be strong enough to do whats required though.....

Ive seen much much worse out there

Screwy
looks good mate, I know this was bugging you :D


hows the rest coming along for RD3?
pretty good.... check my thread
;)
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 399
Joined: Sat Oct 31, 2009 9:16 pm
Location: Nth Richmond. NSW

Post by Black Bull »

Nicely done Screwy. ;)
only issue is you might get some narky cop book you for "protrusions" on your bar
Top
Posts: 2513
Joined: Sat Mar 05, 2005 1:14 am
Location: ingleburn

Post by familybus »

Black Bull wrote:Nicely done Screwy. ;)
only issue is you might get some narky cop book you for "protrusions" on your bar
they dont look any further out than the fairlead so they prob wont hassle him anyways, but just to be a bit sort like yah give a hoot about saftey just wack a pair of those yellow caps over yah eyelets like the ones they use on star pegs in worksites!

im just about to build a bar on the dual cab Mav and goin to do just that so it hides the eyelets!
just a thought any way!
[color=lime][b]Im not a gyno but ill take a look at it for you![/b][/color]
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: Bing [Bot] and 0 guests