just a quick Q for you all,
how do i correct the speedo for running larger tyres on my 60 series?
-Pyro
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
60 series speedo correction?
Moderators: toaddog, Elmo, DUDELUX
60 series speedo correction?
Zooks are for people that aren't afraid of angles and who have nothing to compensate for
[O]=TOYOTA=[O]<< OL Build up
[O]=TOYOTA=[O]<< IH8MUD Build up
[O]=TOYOTA=[O]<< OL Build up
[O]=TOYOTA=[O]<< IH8MUD Build up
Marks do a speedo correction box, you need to see how much yours is out (use a gps) and they can supply one to suit. (there are 3 off the shelf units available also) Cost is around 200 bucks. Or, try a heap of different 60 speedos...... I have 285x75x16 on my 60, and speedo is near spot on, just a little under (around 2 k's at 100 kph)
My 60 series rebuild....
http://www.outerlimits4x4.com/ftopic103004.php&highlight=
http://www.flyology.com
2006 CRV Sport (wifes car)
http://www.outerlimits4x4.com/ftopic103004.php&highlight=
http://www.flyology.com
2006 CRV Sport (wifes car)
i know you can get them for the electronic speedos like in an 80S
Zooks are for people that aren't afraid of angles and who have nothing to compensate for
[O]=TOYOTA=[O]<< OL Build up
[O]=TOYOTA=[O]<< IH8MUD Build up
[O]=TOYOTA=[O]<< OL Build up
[O]=TOYOTA=[O]<< IH8MUD Build up
flyology wrote:Marks do a speedo correction box, you need to see how much yours is out (use a gps) and they can supply one to suit. (there are 3 off the shelf units available also) Cost is around 200 bucks. Or, try a heap of different 60 speedos...... I have 285x75x16 on my 60, and speedo is near spot on, just a little under (around 2 k's at 100 kph)
Mine was about that much...
Had it made at my local sparky while i waited.
It screws into the g/box where the speedo cable screws in and the speedo cable is then screwed into the correction box.
Had to fit it for the engineer.
_______________________________________
61 Series..12HT..SOA..37"claws.
61 Series..12HT..SOA..37"claws.
Who is online
Users browsing this forum: No registered users and 143 guests