Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Internall rollcage 80 series
Moderators: toaddog, Elmo, DUDELUX
Internall rollcage 80 series
Im looking at making a full internal cage in my 80. Just wondering if anyone has any pictures to give me a few ideas on where to mount it to and also how hard is it to get it engineered?
I'm getting a full cage fitted at the moment. should have the car back by the end of the week, and will be more then happy to take photos and will be able to tell you more about it.
I've also bought one off outer where i got a few ideas from wich i will be putting up for sale in the next few weeks for a couple hundred dollars if anyone is interested. cage be a good starting point to make one from.
The cage i bought i couldn't get engineered because the front post ran down beside your legs, in front of the dash.
I've also bought one off outer where i got a few ideas from wich i will be putting up for sale in the next few weeks for a couple hundred dollars if anyone is interested. cage be a good starting point to make one from.
The cage i bought i couldn't get engineered because the front post ran down beside your legs, in front of the dash.
Not an 80 but Good ideas anyway
http://forum.ih8mud.com/60-series-wagon ... lcage.html
http://forum.ih8mud.com/60-series-wagon ... lcage.html
S.E.Qld Locals Crew.....
It can be done having a internal rollcage registered and engineered. I have gone through this with my 80 series. I have a six point cage fully engineered and legally registered and noted on my rego papers. I am in NSW.
It is clearance that is the issue and you cage will need to be padded. You will need to comply withLight vehicle code of practise 3.6 occupant seating and protection. You will also need a engineer that is prepared to accept that it can be done. Most will tell you that a 6 point cage can't be legally engineered. The interior space on an 80 allows this but something like a hilux forget it Don't be afraid to question them and politly show them the documentation if it can be done and comply. My engineer initially refused to acknowledge the cage and I questioned him as I had sent him a lot of information regarding it. He provided me with the speciafication and I did the rest. The cage complied.
Make the tool out of carboard and and string and do the measurments before spending thousands on a cage. That's my advice. You will quickly find out if it can be done or not. If you are in the Western Sydney area I still have tool if you wish to take some measurments. PM me.
Note the diagonal crossbrace is for offroad only. Cna't get it past as it interferes ith the rear passenger's legs.
Cheers, Chris
It is clearance that is the issue and you cage will need to be padded. You will need to comply withLight vehicle code of practise 3.6 occupant seating and protection. You will also need a engineer that is prepared to accept that it can be done. Most will tell you that a 6 point cage can't be legally engineered. The interior space on an 80 allows this but something like a hilux forget it Don't be afraid to question them and politly show them the documentation if it can be done and comply. My engineer initially refused to acknowledge the cage and I questioned him as I had sent him a lot of information regarding it. He provided me with the speciafication and I did the rest. The cage complied.
Make the tool out of carboard and and string and do the measurments before spending thousands on a cage. That's my advice. You will quickly find out if it can be done or not. If you are in the Western Sydney area I still have tool if you wish to take some measurments. PM me.
Note the diagonal crossbrace is for offroad only. Cna't get it past as it interferes ith the rear passenger's legs.
Cheers, Chris
Who is online
Users browsing this forum: No registered users and 49 guests