Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

what do people do to lock rear of gen 1, 2.6L lwb paj?

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 58
Joined: Fri Mar 19, 2010 10:32 am
Location: ADELAIDE

Contact:
Contact MOO_R32

what do people do to lock rear of gen 1, 2.6L lwb paj?

Post by MOO_R32 »

whats the best/cheepest way??
GQ SWB PATROL 3" LIFT, TB42 TURBO, 35X12.5X15,HID'S, LED EVERYTHING..

https://www.facebook.com/#!/ledlightingsa
Top
Posts: 146
Joined: Thu May 07, 2009 3:10 pm
Location: Sunshine coast QLD

Post by Jonezy01 »

Cheapest way would be to weld it, personaly I would stick a LSD in it if doesnt already have one, Mitsubitishi is known for having one of the tightest LSD around. If it already has one and you still want more just shimm it right up. other than that you start looking at lots of $.
Top
Posts: 58
Joined: Fri Mar 19, 2010 10:32 am
Location: ADELAIDE

Contact:
Contact MOO_R32

Post by MOO_R32 »

yea was looking at shimming it but cant find out what kind of lsd it is? viscus etc etc?
GQ SWB PATROL 3" LIFT, TB42 TURBO, 35X12.5X15,HID'S, LED EVERYTHING..

https://www.facebook.com/#!/ledlightingsa
Top
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

MOO_R32 wrote:yea was looking at shimming it but cant find out what kind of lsd it is? viscus etc etc?
They were still using ramp loading clutch type in the Gen 2, then moved onto Torsen. I can't imagine they had a viscous LSD in Gen 1.
Top
Posts: 58
Joined: Fri Mar 19, 2010 10:32 am
Location: ADELAIDE

Contact:
Contact MOO_R32

Post by MOO_R32 »

any ideas how they are tightened up?
GQ SWB PATROL 3" LIFT, TB42 TURBO, 35X12.5X15,HID'S, LED EVERYTHING..

https://www.facebook.com/#!/ledlightingsa
Top
Posts: 23
Joined: Fri Feb 06, 2009 6:28 pm
Location: Albury

Post by epitrochoid »

usually shims are added to apply extra clamping force on the clutch packs. while you are in there look at renewing the clutch packs as these do wear out.

REgards

epitrochoid
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 2 guests