Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

2h wont glow

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 33
Joined: Sun Apr 18, 2010 6:12 pm
Location: melbourne

2h wont glow

Post by buff man »

hj60 2h diesel will not glow the plugs. battery is in good cond only about 3 months old and replaced a voltage regulator at that time. now when i turn the key the 'GLOW' light on the dash barely flicks on for a split second if at all about 2 out of 10 turns i get a slight flick off light from the 'GLOW' light. glow fuse is not blown. wind it over and nothing not even white smoke out the exhaust.
HJ60, 2H-T, fairy o/d, 33" MTZ, 2" shackles
Top
Posts: 68
Joined: Thu May 21, 2009 8:27 pm
Location: tassie

Post by brissle »

glow relay
Top
Posts: 765
Joined: Fri Mar 12, 2010 7:28 pm
Location: Fixing something else the kids have broken

Post by BadMav »

It's common to bypass the relay (behind the glovebox) and put a push button on the dash. My 75 was set up that way.
Don't take life too seriously...it isn't permanent.
Top
Posts: 33
Joined: Sun Apr 18, 2010 6:12 pm
Location: melbourne

Post by buff man »

cheers boys
HJ60, 2H-T, fairy o/d, 33" MTZ, 2" shackles
Top
Posts: 3
Joined: Sat Mar 21, 2009 10:17 pm
Location: perth

Post by forty5 »

a lot of cruisers will still glow when light is off, sometimes light goes off and you can hear the relay click out later, leave it a few more seconds and try it, if not most likely relay or bad glow plugs, a quick way to test is to run a thick wire to the glow plug relay straight from battery, if this works then the glow plugs are ok.
Top
Posts: 1443
Joined: Thu Jul 10, 2008 6:23 pm
Location: Probably driving a dozer

Post by Wozza244 »

Start at the base, check the glow rail for voltage, then check it cuts in and out with relay, if thats all working then pull a glow plug out and hook him up while holding it with pliers and dump the tip in some water, if it sizzles instantly you have good glow plugs, if not they need replacing.
Get out there!!
Top
Posts: 83
Joined: Mon Nov 23, 2009 8:39 pm
Location: sunny coast

Post by luk3y »

mine stopped glowing and it ended up being hte alternator. just another though
Gu Ute with stuff
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 104 guests