Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
gear box
Moderator: -Scott-
Sounds as though the selector has poped out, You might be lucky enough to pop it back in through the top of the box ( ie removing the gear stick) Other wise you have to drop the gear box out and split it. Its not that hard if you no what your doing and where your looking if not it shouldn't be to expensive to take it to a a gear box place and get them to do it.
Then you might as well do all the bearings and seals while it's out.
This can be caused from wear and tear but it is usualy a result from changing gears to hard (ie slaming it from from first to second or visa versa pushing it hard it into first before stopping etc...)
Jonezy
Then you might as well do all the bearings and seals while it's out.
This can be caused from wear and tear but it is usualy a result from changing gears to hard (ie slaming it from from first to second or visa versa pushing it hard it into first before stopping etc...)
Jonezy
Who is online
Users browsing this forum: No registered users and 14 guests