Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
blow thru turbo.
blow thru turbo.
Hey all just wondering what carbys people are using for a blow thru carby turbo setup?? will the stock one work without callapsing the float. i really want to keep the stock carby. any help would be great. also pics of this setup would be good to see to thanks
Do you have any experience with setting up blow through carbies on other engines? Why do you want to keep the stock carby? Most people can't get them to work properly atmo let alone with boost running through them.
Personally I think trying to set up a blowthrough carby on a 4wd is a waste of time, especially on a Sierra with so many cheap ways of running efi. I reckon by the time you backed the boost down low enough to make the carby run properly you would gave more power more reliably with a 1.6 efi conversion atmo.
Just my 2c. I have no experience with turbo conversions on g series motors, but from what I have seen they generally have a short, expensive life.
Steve
Personally I think trying to set up a blowthrough carby on a 4wd is a waste of time, especially on a Sierra with so many cheap ways of running efi. I reckon by the time you backed the boost down low enough to make the carby run properly you would gave more power more reliably with a 1.6 efi conversion atmo.
Just my 2c. I have no experience with turbo conversions on g series motors, but from what I have seen they generally have a short, expensive life.
Steve
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
I've seen to0 many unsucessfully blow throughs ( admittedly years ago ) to have any interest in them. The best i saw was a Webber made for blow through operation but IIRC was using low boost.
Even draw through can be challenging, carbies have an operation range largley governed by their throat diameter.... pick one small enough to run well on a small engine at low output and its not going to like big airflows when on boost and vice versa. EFI isn't perfect either but you can run staged injectors etc etc if it turns into a major truma.
For all the pain, and given the ready availability of EFI systems, i'd suggest that's the way to go.
Even draw through can be challenging, carbies have an operation range largley governed by their throat diameter.... pick one small enough to run well on a small engine at low output and its not going to like big airflows when on boost and vice versa. EFI isn't perfect either but you can run staged injectors etc etc if it turns into a major truma.
For all the pain, and given the ready availability of EFI systems, i'd suggest that's the way to go.
( usual disclaimers )
It seemed like a much better idea when I started it than it does now.
It seemed like a much better idea when I started it than it does now.
There are many great blow through carbies available these days especially coming out of america, problem is they are just about all for V8's and much to big for a zook motor lol. That said you could maybe go the Vortech carby enclosure route, but I assume you'd have to custom make your own to fit.
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
Which pretty much says it all....... in the days of cheap effective efi systems why anyone would actually make let alone use a carby escapes me.
Perhaps is a historical counter-reaction... in the days of carbies people drooled over injection and it was the primative mechanical stuff.... now with carbies being rare........
And even a "good" blow through ( and i'm not convinced thats possible ) doesn't fix the ingintion issues.
Electronics rules.
Perhaps is a historical counter-reaction... in the days of carbies people drooled over injection and it was the primative mechanical stuff.... now with carbies being rare........
And even a "good" blow through ( and i'm not convinced thats possible ) doesn't fix the ingintion issues.
Electronics rules.
( usual disclaimers )
It seemed like a much better idea when I started it than it does now.
It seemed like a much better idea when I started it than it does now.
Who is online
Users browsing this forum: No registered users and 0 guests