hey got a vit swb 3inch sus 3 inch body
wanna put gv steel diff housing and hilux cv's but anyone got an opinion and how hard to install anything need to know before i have a crack??
cheers guys
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
hilux cvs in vitara install????
hilux cvs in vitara install????
'93 Zook Vit.
There is sweet FA out there about this anymore. I have contacted a few VERY old contacts on Zukiworld and Zuwharrie to try and get some answers, but I'm not holding my breathe.
Alternately, I have installed this kit once before, so I may be able to reproduce the kit if need be.
Peter
Alternately, I have installed this kit once before, so I may be able to reproduce the kit if need be.
Peter
[url]www.twinstickoffroad.com[/url]
I got into contact with the Zukiworld guy last week that makes the kit.
Is your truck road legal?
for the hilux CV's you need to widen your front end by relocating the rear mount holes on the front A-arms. and then buy the zuk/hilux spacer adaptor off the guy in the states, you need to clearance the spindle aswell to fit the hilux cvs. I was going to do it with my calmini kit + anvil with steel 3rd, but it still needed widening and the stub shaft to bt cut, with zuk/lux adaptor put in the orginals place. what extra work you need to do with standard arms im not sure, as I only got info on my situation.
basically its alot of work, and only really needed for 33s+. with the new dif you would be better converting the driverside to a 3bolt cv, then changing the cv on trail only takes 5mins.
Is your truck road legal?
for the hilux CV's you need to widen your front end by relocating the rear mount holes on the front A-arms. and then buy the zuk/hilux spacer adaptor off the guy in the states, you need to clearance the spindle aswell to fit the hilux cvs. I was going to do it with my calmini kit + anvil with steel 3rd, but it still needed widening and the stub shaft to bt cut, with zuk/lux adaptor put in the orginals place. what extra work you need to do with standard arms im not sure, as I only got info on my situation.
basically its alot of work, and only really needed for 33s+. with the new dif you would be better converting the driverside to a 3bolt cv, then changing the cv on trail only takes 5mins.
Who is online
Users browsing this forum: No registered users and 52 guests