Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

sub tanks and turbo timer on 73

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 98
Joined: Fri May 15, 2009 8:55 pm
Location: brisbane

sub tanks and turbo timer on 73

Post by ndog »

hey guys i am wondering if a sub tank off an 80 will fit somewhere under my bj73 or if any1 knows any tanks that will? and am wondering if some1 can give me some good details on how to set up a turbo timer? ..
Top
Posts: 1109
Joined: Mon Feb 12, 2007 8:48 pm
Location: Australia

Post by hulsty »

Doubt very much it would fit, they are completely different vehicles. I have seen a custom belly tank that fits under the passenger side. Alternatively I am selling a ~140L tank for the rear if your interested.
The Silver Bullet - BJ74
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Top
Posts: 734
Joined: Sun Mar 06, 2005 5:25 pm
Location: Sunshine Coast Queensland

Re: sub tanks and turbo timer on 73

Post by midi73 »

ndog wrote:hey guys i am wondering if a sub tank off an 80 will fit somewhere under my bj73 or if any1 knows any tanks that will? and am wondering if some1 can give me some good details on how to set up a turbo timer? ..
Try the front tank out of a 75 series ute
Top
Posts: 1109
Joined: Mon Feb 12, 2007 8:48 pm
Location: Australia

Post by hulsty »

They dont fit either, floor pan is different and a middy has cross memeber in the way.
The Silver Bullet - BJ74
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Top
Posts: 98
Joined: Fri May 15, 2009 8:55 pm
Location: brisbane

Post by ndog »

hey hulsty yer how much u want for it ? and where bout u from?
Top
Posts: 1109
Joined: Mon Feb 12, 2007 8:48 pm
Location: Australia

Post by hulsty »

It owes me $300, bought it but never used it, not suitable for my setup.

Let me know your address and I will give you a freight cost, email too and I can send pics.
The Silver Bullet - BJ74
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Top
Posts: 734
Joined: Sun Mar 06, 2005 5:25 pm
Location: Sunshine Coast Queensland

Post by midi73 »

hulsty wrote:They dont fit either, floor pan is different and a middy has cross memeber in the way.
Fair enough. I reckon you might be able to make the tank out of a late 42 series fit . It goes predomenantly on the right hand side but some of it goes over the tail shaft. Looking at them it looks like it would not be to hard to fit.
Top
Posts: 98
Joined: Fri May 15, 2009 8:55 pm
Location: brisbane

Post by ndog »

ok that sounds good, i live in middle park, brisbane, qld has it got straps and stuff , does it just bold straigt in? email: nat_progolfer@hotmail.com thanks hulsty
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 60 guests