Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

shaft play in turbo??

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 76
Joined: Fri Apr 09, 2010 2:31 pm
Location: melbourne

shaft play in turbo??

Post by biegetroopy »

is a little shaft play ok or should there be none at all ,how much roughly would a gt 2876r cost to rebuild roughly??/ thanks mick
Top
Posts: 646
Joined: Thu Sep 07, 2006 10:51 pm
Location: Central Coast NSW

Post by Clanky »

Roughly:

axial endplay is very small

radial endplay for bush bearing turbo is there from new and is ok up to whatever the manufacturer specs

BB turbs have very little axial or radial play

check the manufacturers datasheet and measure it up to see if its ok
Top
Posts: 76
Joined: Fri Apr 09, 2010 2:31 pm
Location: melbourne

Post by biegetroopy »

thanks for that!
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests