Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Just bought a 4runner, looking at puting some sunnies and 33's on it. just wondering if anyone has any pointers or advice for the offset i should be looking for. -22?
I'm running -44 but they hang out a fair way.. Needed a little body bending(seams etc) before they fit. From what I've read you can go -22 up to -29 (Nissan offset) without any problems..
With the edition of flares, ill look to go for the nissan offset (-29) or (-22) without the flares.
the tyres im looking to buy are Maxxis Bighorns in 33"x12.5. Id like to put them on 15" sunnies but not sure what width sunnies to get. 15"x7" or 15x8", anyone know if it will matter or which size is more suitable?
Go minimum 15x8's. Had 15x7's with the same size tyre and it was a battle ship to drive!!! so much sidewalk flex the car rolled around like crazy in the corners.. Now I'm on 15x10's -44 offset and would never look back!! Even down around 15 psi still drives sweet as.
That may be true actually.. Depeands on how much lift you have?! I'm running 2 inch body lift plus 4 inch spring lift and have no scrubbing issues at all with my offset on 33x12.5x15's. If your running less than that you may need the smaller offset.
are you running flares?
was told buy the tyre guy without them something like a navara offset
tryed the pootrol as their was one getting fitted up with 33s at the time
stuck out heeeps and touched the cab!body lift is needed also!
With my 6 inches lift, under full flex there is no rubbing. Yes I have the fibre glass flares but they still stick outside of them. Will need some wider plastic flares but only to stop mud flicking up everywhere... And to pass rego!!
Latitude777 wrote:With my 6 inches lift, under full flex there is no rubbing. Yes I have the fibre glass flares but they still stick outside of them. Will need some wider plastic flares but only to stop mud flicking up everywhere... And to pass rego!!
ok fair enuf 6'' full suspension hey,how you go with the ifs and cv angularity?
Latitude777 wrote:With my 6 inches lift, under full flex there is no rubbing. Yes I have the fibre glass flares but they still stick outside of them. Will need some wider plastic flares but only to stop mud flicking up everywhere... And to pass rego!!
ok fair enuf 6'' full suspension hey,how you go with the ifs and cv angularity?
no probs so far.. Still runing stock bump stops so they don't droop anymore than they do as standard. Will eventually get diff drop brackets n lower profile bump stops but it ain't priority at the moment.
By the way it's only 2 inches body lift and 2 inch suspension lift with 1 1/2 inch bj spacers front n 2 1/2 inch spring spacers rear which equates to roughly 4 inches suspension lift. Am also planning on replacing rears with 80 series coils for full flex benefit and will maintain 4 inch rear lift.
