Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

stainless steel snorkels?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 18
Joined: Mon May 17, 2010 5:51 pm
Location: Melbourne

stainless steel snorkels?

Post by JRosenhain »

Just wondering if anyone knows someone in melbourne who fabricates these snorkles.

Most people have been saying they make them themselves, id struggle to find the time.
Top
User avatar
DUDELUX
God of Umm
Posts: 4770
Joined: Sat Oct 27, 2007 11:21 pm
Location: im with Stuppedy

Post by DUDELUX »

Stainlesss Steel is real expensive, Ive had a quote from the SS welders at my work, for a 3inch SS snorkle for a mate of mine, all one piece, was over 150bucks. And thats mates rates, cost price for the SS(314) and a little bit on top for labour.
Mine was given to me, complete, but not the best welding, so I had the guys at work cut and re tig it, making it 100mm longer. It cost a carton of stubbies.
MrsForby wrote: Oh I desperately truly love the taco.
Top
Posts: 261
Joined: Tue Apr 07, 2009 12:38 am
Location: Melbourne

Post by mellows40 »

heres the answer for you....
www.millweld.com/
Millweld make custom 4x4 bit and pieces.... from snorkals to tube bars and rocksliders..
they are in Bayswater and easy to find...
Mine: A Tough little fj40
and a 105 series diesel
Hers: TJ Jeep Wrangler... Stock
Cheers Eric
Top
Posts: 49
Joined: Fri Jun 12, 2009 11:48 am
Location: Wollongong

Post by BJMorgo »

Stainless looks really good - however it sets up a corrosion cell with carbon steel and aluminium. To help prevent corrosion of the mild steel you can make sure any cut edges in contact with the stainless are well insulated with paint or rubber etc
Top
Posts: 169
Joined: Fri Jul 08, 2005 3:19 pm
Location: Richmond NSW

Post by pridhac »

I noticed Ben at 4Bfab making SS snorks when I picked up my rear bar. He does good work too if my rear bar is anything to go by...

http://www.4bfabrications.com.au/
Top
Posts: 261
Joined: Tue Apr 07, 2009 12:38 am
Location: Melbourne

Re: stainless steel snorkels?

Post by mellows40 »

JRosenhain wrote:Just wondering if anyone knows someone in melbourne who fabricates these snorkles.

Most people have been saying they make them themselves, id struggle to find the time.
Well there you go two fabricators in melbourne....
Mine: A Tough little fj40
and a 105 series diesel
Hers: TJ Jeep Wrangler... Stock
Cheers Eric
Top
Posts: 289
Joined: Mon May 29, 2006 8:27 pm
Location: carrum downs

Post by UrbanRedneck »

At 4b fab we make snorkles to suit most cars as we make them to suit individual cars we require the car to do them.
we can make them with rubber bends or my speciality is welded stainless mandrel bend snorkles.
Give Benno a call and we can hook you up.

Cheers Damo
have grinder will fit
www.4Bfabrications.com.au
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 102 guests