Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Stop warn Hi Mount Brake Rust/seize

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 13
Joined: Mon Oct 26, 2009 11:02 am
Location: Gold Coast Qld

Stop warn Hi Mount Brake Rust/seize

Post by Skiboy »

Anyone got any ideas on how to stop a warn hi mount brake from rusting and seizing when not in use?

Is there some treatment or way of assembling that stops this or is it a matter of putting a cover over it.

All help and suggestions welcome.
Skiboy
Top
Posts: 2853
Joined: Tue Nov 30, 2004 10:55 pm
Location: All over the world or your mum

Post by toughnut »

Just keep it clean and try to keep it dry. Dont use a lube on it for obvious reasons. Include it in your normal servicing schedual and if you are going wheeling then run your winch out and back in a couple of times to keep it moving.
j-top paj wrote:gayer than jizz on a beard
http://www.outerlimits4x4.com/viewtopic ... 6&t=231346
Top
Posts: 13
Joined: Mon Oct 26, 2009 11:02 am
Location: Gold Coast Qld

Post by Skiboy »

Thanks Tough Nut - figured as much
The truck sits outside so might make up a cover at least for the brake so not get wet and will make sure it gets a run on each trip

Skiboy
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Give it a spray with a phosphate rust convertor and let it dry. It will help a bit.

BAzzle
Top
Posts: 13
Joined: Mon Oct 26, 2009 11:02 am
Location: Gold Coast Qld

Post by Skiboy »

Bazzle thanks
A suggestion I got on another forum is to nickle plate the brake discs
They say never rusts again!

Skiboy
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 124 guests