Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

replaced governer seal now wont rev

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 1
Joined: Sun Dec 06, 2009 9:36 pm
Location: bundy

replaced governer seal now wont rev

Post by camerondp »

replaced the governor seal on 4.2 td simple take the top off and put it back on only took the fuel screw out to put the top back on. car idles fine just when you push the accelerator nothing happens. anyone had the same problem??
Top
Posts: 93
Joined: Mon May 18, 2009 9:44 pm
Location: mornington

Post by kane077 »

Sounds like the spring from the governor shaft inside the pump has fallen off. If so, thats not good as there is a tiny spring and pin thing that is probably sitting in the bottom of the pump about now! Take the cover back off and have a look.
Peninsular Diesel Repairs
59 788 400
Top
Posts: 129
Joined: Tue Apr 01, 2008 8:39 pm
Location: Warrnambool

Post by GQ4.2 »

maybe you need to wind the fuel screw back in
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 33 guests