Hi all,
Recently purchased another GQ, noticed reverse lights dont work, changed bulbs and didnt fix it. Connected my lights to another GQ to check if problem with actual Light fitting....it works on other GQ.
Went back and tested if power is arriving to back when reverse is engaged, its not. And now im stuck. I checked and fuses just in case something was blown, all fine. Brake lights and blinkers all work fine but just not reverse.
Dont know what it could be. Rego in a couple of days so need to fix asap.
Any help would be great. Its a 4.2 Petrol Carby Manual Patrol.
thanks in advance
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
No Reverse Lights
Reverse
Check output of reverse switch on gearbox.
Mitchell Bros 4x4 & More
16 Chard Road Brookvale NSW 2100
02 9905 4764
http://www.mitchellbros4x4.com.au
http://store.mitchellbros.com.au/rigid- ... led-lights
16 Chard Road Brookvale NSW 2100
02 9905 4764
http://www.mitchellbros4x4.com.au
http://store.mitchellbros.com.au/rigid- ... led-lights
If the truck does a lot of river crossings or 'water work' the reverse switch on the top of box shorts out and its a bitch to change the switch.
As this circuit is also on the alternator excitation/gauges fuse your alt also stops working and obviously then the batts go flat. (NZ Patrols/Safari's)
So most guys (including myself) leave it disconnected......so maybe thats the reason.
if you need to change the switch - it can be done in place with lots of extensions bars and sacrificing a spanner and socket!
good luck
As this circuit is also on the alternator excitation/gauges fuse your alt also stops working and obviously then the batts go flat. (NZ Patrols/Safari's)
So most guys (including myself) leave it disconnected......so maybe thats the reason.
if you need to change the switch - it can be done in place with lots of extensions bars and sacrificing a spanner and socket!
good luck
GQ with 30 PSI of TD42T.........
Who is online
Users browsing this forum: No registered users and 0 guests