Hi guys does any one know if there is a good way to check if your arail is working properly ive been haveing some problems getting people lately
and i think its my arail.
any ideas.?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
UHF Arial Problem
Moderators: toaddog, TWISTY, V8Patrol, Moderators
UHF Arial Problem
Ford maverick with 5.0L EFI windsor
If you have a multimeter check for continuity - with the antenna unplugged.
Should have a low resistance circuit (<1 Ohm ) between the plugs outer and ground
Should have a low resistance circuit (<1 Ohm ) between the plugs inner and the antenna driven element ( or its mounting bolt if its insulated )
Should NOT have a circuit between the plugs out and inner.
If that doesn't help - then some expert assistance is required as suggested.
Should have a low resistance circuit (<1 Ohm ) between the plugs outer and ground
Should have a low resistance circuit (<1 Ohm ) between the plugs inner and the antenna driven element ( or its mounting bolt if its insulated )
Should NOT have a circuit between the plugs out and inner.
If that doesn't help - then some expert assistance is required as suggested.
( usual disclaimers )
It seemed like a much better idea when I started it than it does now.
It seemed like a much better idea when I started it than it does now.
just to make you aware in case you don't know when I went to a 4x4 show the gme sales rep filled me in about db gain the higher it is the longer the range the down side you loose spread he explained it as the football vs pizza theory with the car being in the middle so if your having problems in the hills but not the flat it might be the problem
Yes metak that's correct.... the higher the gain the flatter the radiation pattern, instead of the transmitted power being directed up as well as out a higher gain antenna tends to flatten the radiation pattern.
Note : the transmitters power output doesn't change - its just "compressed" into a thinner vertical plane giving a greater effective radiating power
On flat country this does generate longer range BUT in hilly country this flat pattern can limit it.
Its a case if "nothing is for free" - so in practice a lower gain antenna may be more useful depending on the terrain you drive
Note : the transmitters power output doesn't change - its just "compressed" into a thinner vertical plane giving a greater effective radiating power
On flat country this does generate longer range BUT in hilly country this flat pattern can limit it.
Its a case if "nothing is for free" - so in practice a lower gain antenna may be more useful depending on the terrain you drive
( usual disclaimers )
It seemed like a much better idea when I started it than it does now.
It seemed like a much better idea when I started it than it does now.
Who is online
Users browsing this forum: No registered users and 63 guests