My car blew a head gasket so I'm
going to get it crack and pressure checked,
is there any thing else i should get checked/changed while its off?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
G16A cylinder head
Re: G16A cylinder head
The 16a's are faily good. Any good shop will find any problem doing a pressure test. But seeing as you have it off I would put a full VRS through it and shave the head down to get higher compression. measure your valve clearance and shave it down so you only have 3mm or so clearance. It will give you a little more power on the get go.
Who is online
Users browsing this forum: No registered users and 0 guests