Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
GU hub socket
GU hub socket
Were can i get one
6" of 44.5 cds
2 x 5mm bolts ( i think without looking)
cut the heads of the bolts off, weld the threaded ends to the out side of the pipe with 20mm protruding at 180deg.
drill a big hole through the pipe at the other end to fit a screw driver through.
cheers smitty
2 x 5mm bolts ( i think without looking)
cut the heads of the bolts off, weld the threaded ends to the out side of the pipe with 20mm protruding at 180deg.
drill a big hole through the pipe at the other end to fit a screw driver through.
cheers smitty
innovation is better, better is faster, and fast is all that counts
Who is online
Users browsing this forum: No registered users and 14 guests