Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Where is the best Place to Buy a good quality turbo
Where is the best Place to Buy a good quality turbo
Hi all, Been a while since I have posted. Looking at upgrading my turbo on my GQ TB42 (strait gas). Was thinking a garret or something along them lines. Im in Melbourne Vic
what other mods have you got?
No point going to a big turbo etc if you don't have the fuel to match it.
If you don't have a high capacity fuel system look at getting something along the lines of a GT3071R-56T T3. Around $1800 for a new one depending where you buy but that should bolt up okay.
If you're after a cheaper option look for high flowed skyline turbos second hand.
If you do have a decent fuel system and are looking at going for serious power then maybe a GT3582R.
http://www.horsepowerinabox.com/ 08 8463 0913
http://www.gcg.com.au/ 1300 TURBOS (1300 887 267)
http://www.mtqes.com.au/index.php MTQ Melbourne, 1 westside Drive, Laverton, VIC, Ph: 03 9315 1633
these sites and numbers should get you a fair way to getting you the info you need.
No point going to a big turbo etc if you don't have the fuel to match it.
If you don't have a high capacity fuel system look at getting something along the lines of a GT3071R-56T T3. Around $1800 for a new one depending where you buy but that should bolt up okay.
If you're after a cheaper option look for high flowed skyline turbos second hand.
If you do have a decent fuel system and are looking at going for serious power then maybe a GT3582R.
http://www.horsepowerinabox.com/ 08 8463 0913
http://www.gcg.com.au/ 1300 TURBOS (1300 887 267)
http://www.mtqes.com.au/index.php MTQ Melbourne, 1 westside Drive, Laverton, VIC, Ph: 03 9315 1633
these sites and numbers should get you a fair way to getting you the info you need.
Beaut Utes and 4x4's - Driving your dollar further off road
Call Matt - 0411 563 300
[url]beautute.com.au[/url]
lockers, tyres, tube bar work, ute chops
Call Matt - 0411 563 300
[url]beautute.com.au[/url]
lockers, tyres, tube bar work, ute chops
Hi bud.
Mtq in brisbane is great, they will ask you a ton of questions and spend the time with you to find the right turbo, Their prices are also very reasonable and they freight.
cheers mark.
Mtq in brisbane is great, they will ask you a ton of questions and spend the time with you to find the right turbo, Their prices are also very reasonable and they freight.
cheers mark.
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
Sorry I should have given a more accurate description of my set-up.
as it stands I have 2x B2 converters and and a GRA throttle body (twin lines from tanks), its intercooled and set up with lcoked timming, petronix ignitor and an ice ignitionmodule and coil.
Currently running a T3 flange chinese turbo with 3inch inlet and 3inch V-band and a 2inch outlet on the compressor.
Power is not the problem I'm having. Its overboosting and is also slow to spool. it hasnt been tuned with 2 converters yet.
I would like to stay internal wastegate if possible to prevent mods to my exhaust manifold.
I'd like something to bolt in place with no mods if possible
as it stands I have 2x B2 converters and and a GRA throttle body (twin lines from tanks), its intercooled and set up with lcoked timming, petronix ignitor and an ice ignitionmodule and coil.
Currently running a T3 flange chinese turbo with 3inch inlet and 3inch V-band and a 2inch outlet on the compressor.
Power is not the problem I'm having. Its overboosting and is also slow to spool. it hasnt been tuned with 2 converters yet.
I would like to stay internal wastegate if possible to prevent mods to my exhaust manifold.
I'd like something to bolt in place with no mods if possible
Who is online
Users browsing this forum: No registered users and 0 guests