Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Tyres 31x12.5
Tyres 31x12.5
Just wanting to hear peoples opoions about running 12.5 wide tyres with the standard 1.3? Also about the srubbing issue, on springs and steering ect....?
ideally you'd run say, a 32x9.5 tyre... however some engineers frown on 32" tyres on a sierra axle... so 31's are what you're left with - and if thats the case the common size is 31x10.5r15 for most makes of tyre.
Maybe give more info on the terrain you drive, if its a daily, if its being engineered or not etc etc etc and people can give better advice to suit your situation.
Maybe give more info on the terrain you drive, if its a daily, if its being engineered or not etc etc etc and people can give better advice to suit your situation.
The worst thing about censorship is ███████.
He is in rocky according to his side bar thingy, so engineering tyres would hardly be a consideration
Personally I would run 31x9.5 on my Sierra if I could, but the tyres that come in that size are essentially not available in Australia. 31x10.5 works fine, just they do touch the springs a bit on full lock with a sensible offset rim. You can get massive offset, but then you get a large scrub radius, horribly wide wheel track and numerous other issues...
Personally I would run 31x9.5 on my Sierra if I could, but the tyres that come in that size are essentially not available in Australia. 31x10.5 works fine, just they do touch the springs a bit on full lock with a sensible offset rim. You can get massive offset, but then you get a large scrub radius, horribly wide wheel track and numerous other issues...
Wheeling on completely wicked angles, without even looking stable.
probably not as good a tyre,but the price might be right.....hankook mts used to have a 31x11.5.The procomps in 31x12 do look sick seen a sierra on them once.BUT id have to go with most others in saying 31x10,32x10 simex or the like(but due to driving rock aswell simex would suck) or even 33x10 if BFG still do them.
With a 10.5 most issues arent as bad as going 12.5s in terms of hitting springs on full lock or front standard shock tower and chewing inner sidewall up.
my 2c
With a 10.5 most issues arent as bad as going 12.5s in terms of hitting springs on full lock or front standard shock tower and chewing inner sidewall up.
my 2c
sierra truggy,37 sticky treps,propane,6.5s and disconnect,lux diffs with spools,16" fox shox,hydro steer.
tyres
Maxxis Mudziller do a 31x11.5x15 not so quiet on the tar awesome in the muc.
Depending on what u want to run em on . They hit on the springs on full lock with nt axles now have wt axles don't hit anymore there on 7" rims with -20 offset
Depending on what u want to run em on . They hit on the springs on full lock with nt axles now have wt axles don't hit anymore there on 7" rims with -20 offset
Thornbirds come in that size too. I love the look of fat tyres but they are completely impractical. Even my 10.5 wide tyres just scrub my springs with max offset desert rat rims and the cops have pinged me for being outside the gaurds.
Sierra
2 inch RUF
G16A
Megasquirt Injection
30 inch BFGs
Vit P/S
4.9 T/C gears
Hilux Project = Dead
2 inch RUF
G16A
Megasquirt Injection
30 inch BFGs
Vit P/S
4.9 T/C gears
Hilux Project = Dead
I have 31x10.5 wranglers and on my old 7" rims they would hit my springs pretty bad on full lock. I've now got 8" rims with -23 offset and they are perfect. It's still really close to hitting though, so if you wanted 12.5"s, you're gonna need pretty massive offset, which will bring on a whole heap of other problems
Who is online
Users browsing this forum: No registered users and 75 guests