Im just putting a GTI motor into my dads Maruti 1lt WT. The problem is i suck at wiring and I told him to label everything as it came out but it seems that he didnt.
The problem is basically just the wires that need to go to the starter and alternator. So its the original wiring loom for the 1lt.
I have the following:
* A plastic plug with black wire/white trace and white wire/red trace
* A thickish wire yellow/white with one end going to batt pos
* black/yellow trace wire with single connector 4mm
*yellow/white trace. Dad marked this as top motor?
*green wire. Marked as bottom motor?
Can anyone help out at all?
Crappy photo sorry
Thanks