Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

will bj40 gearbox & transfer fit fj40

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 9
Joined: Sat Mar 06, 2010 3:32 pm
Location: PORT MACQUARIE NSW

will bj40 gearbox & transfer fit fj40

Post by pipesy »

Can anyone please tell me if a BJ40 gearbox and transfer case will bolt straight up to a FJ 40 F2 motor??????
Top
User avatar
RAY185
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

Nope. Input shaft is not compatible.
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

You can swap the input shaft, and they are different lengths, diffrent clutches, etc etc.

Real pain in the butt, and cheaper and easier to buy the correct gearbox. :cool:
hands and mums dont count!!!
Top
Posts: 9
Joined: Sat Mar 06, 2010 3:32 pm
Location: PORT MACQUARIE NSW

Post by pipesy »

RAY185 wrote:Nope. Input shaft is not compatible.
Thanks for info
Top
Posts: 9
Joined: Sat Mar 06, 2010 3:32 pm
Location: PORT MACQUARIE NSW

Post by pipesy »

RAY185 wrote:Nope. Input shaft is not compatible.
Thanks for info
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests