Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

WMS LC100/LC80

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Contact:
Contact Slunnie

WMS LC100/LC80

Post by Slunnie »

Sorry if this has been comvered, I couldn't find it in searched.

Is there a diffence in WMS between the LC100 solid axles and the LC80's? I can find the LC80 WMS for front and rear, but nothing for the LC100.
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Top
Posts: 183
Joined: Wed Nov 12, 2003 4:52 pm
Location: Brisbane

Post by Tooheys »

found a spec sheet on 100 series that gives the track width for the different models. I know its not the true wms to wms but might help http://www.brian894x4.com/LC100specs.jpg
If at first you dont succeed.......get a bigger HAMMER!!!
Top
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Contact:
Contact Slunnie

Post by Slunnie »

Thanks for this! I didn’t think about comparing track measurements on splitties.

LC40 1404/1350
LC60 1485/1470
LC80DX 1535/1540
LC100DX 1605/1600

Do these specs appear correct? I didn’t realise the 100 was that much wider than the 80.
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Top
Posts: 352
Joined: Sun Aug 30, 2009 1:00 pm
Location: Australia

Post by GO79 »

Redbook.com.au has the stats on each cruiser
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 59 guests