Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

sierra panels questions

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 632
Joined: Wed Sep 07, 2005 8:59 pm
Location: South Gippsland

sierra panels questions

Post by hiluxmad »

are the panels interchangable between late and early sierras?
eg 90 doors on an 82?
is there a cut off that they changed the shape or something?
Keep it shiny side up!
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Top
Posts: 1791
Joined: Fri Aug 24, 2007 3:02 pm
Location: Kurrajong Heights, NSW

Post by BlueSuzy »

All are interchangeable.

Some drovers had half doors with soft windows.
Coilys have side protection bars in the doors for later safety regulations.
There is also mirror changes between models. And different interior panels.
I am Tim
Top
Posts: 140
Joined: Sat Apr 16, 2005 9:18 pm
Location: zzz canberra

panels

Post by mad_zook »

Hilux mad
what do you need to change?
Top
Posts: 1889
Joined: Mon Sep 20, 2004 10:23 pm
Location: Brisbane

Post by just cruizin' »

Only the coilies had different panels that may not match up.
;)
Top
Posts: 632
Joined: Wed Sep 07, 2005 8:59 pm
Location: South Gippsland

Re: sierra panels questions

Post by hiluxmad »

just the two front doors at this stage.
they are a bit bent and we have just done a full respray with a view to sell so dont want to put crap doors on.
found some chaep through a mate 1 is a 90 model WT hard top
and he has another that is a coil soft top with full doors.
just wanting to know if they would fit....
Keep it shiny side up!
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Top
Posts: 1791
Joined: Fri Aug 24, 2007 3:02 pm
Location: Kurrajong Heights, NSW

Re: sierra panels questions

Post by BlueSuzy »

What did i say? :roll:

Edit*

Wasnt your original question doors only?
I am Tim
Top
Posts: 632
Joined: Wed Sep 07, 2005 8:59 pm
Location: South Gippsland

Re: sierra panels questions

Post by hiluxmad »

bluesuzi,
yes my OP was about doors and thank you for the info.
was repling to mad zooks post.
cheers for the info guys.
Keep it shiny side up!
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 14 guests